Parts Needed to Tow U-Haul Trailer with 2018 Mazda CX-9

Question

Question:

If I want to tow a 5x8 uhaul trailer with my 2018 mazda cx9 what will I need to buy?

asked by: Benjamin F

0

Expert Reply:

In order to tow a 5x8 U-Haul cargo trailer with your 2018 Mazda CX-9 you will need a trailer hitch, a 4-Way wiring harness, and a ball mount/hitch ball combo.

There are two Class III 2 inch trailer hitch receivers available for your CX-9, the Curt # C13284 and the Draw-Tite # 76020. Both feature pretty similar designs and will use the same existing holes in the vehicle's frame but I recommend going with the Curt # C13284 because it offers a slightly more recessed (hidden) receiver and a bit more ground clearance.

I have attached an installation video on your 2018 Mazda CX-9 that you can use for reference.

Then for a 4-Way harness I recommend the Tekonsha T-One # 118278 as long as you have the factory tow package. This custom harness will plug right into the built-in port behind the passenger side trim panel. I have attached an installation video on this harness that you can check out as well. If you do not have the factory tow package you will need to go with a universal hardwire harness, for which I recommend the # C59496.

Either option will provide you with a 4-Way connector that will connect with the 4-Way already installed on the U-Haul trailer to power its basic signal lights.

Lastly for a ball mount the Curt # C45030 should work great. It features either a 1 inch rise or a 2-1/4 inch drop and can be used with a 2 inch ball like # 63845.

I have attached a couple great articles on trailer towing that you might also find helpful.

expert reply by: Chris R

0

Answer 1

The Draw-Tite #76020 does have a tech tip of needing to modify the heat shield as it does fit a few years of the Mazda CX-9. Some of the 2018 models did need this shield modified slightly to fit properly, but it looks like that may have been…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 4

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The recommended clearance with leaf spring suspension on an unloaded trailer is between 2 - 2-1/2 inches. You should have sufficient clearance with your loaded trailer, as leaf springs only tend to deflect 1-1/2 inch when carrying a load.

view full answer...

Answer 7

The best hitch for a 2024 Kia Sportage is the Curt Hitch item #C94WR. This hitch is custom fit and bolts to your Sportage with included hardware. It is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 525 lbs…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The distance from the center pinhole of Draw-Tite Max-Frame Trailer Hitch Receiver #76020 to the end of your 2019 Mazda CX-9 bumper will be about 7 inches. Fortunately, most trailer hitch bike racks have extra length on the shank to ensure that you…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

Spring Hanger location dimensions are normally figured by the manufacturer and provided with the spring hanger kit, that includes all of the parts for installing the springs on the trailer frame. I have provided a chart that shows the spring hanger…

view full answer...

Parts Needed to Tow U-Haul Trailer with 2018 Mazda CX-9

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching