Could Buyers Products Hitch Plate Chevy/GMC # 3371809065 Fit 2009 Chevy Silverado with Dump Bed

Question

Question:

Do you make this product for a 2009 chevy silverado 2500hd 8 foot bed? I have a dump bed on truck and I want this style of reciever.

asked by: Tony

1

Helpful Expert Reply:

As long as your truck originally was a cab and chassis model of truck before the dump bed was installed the Buyers Products Hitch Plate with Receiver Tube - Chevy/GMC # 3371809065 that you referenced would fit and work well.

expert reply by: Jameson C

1

click to enlarge

Answer 1

According to Buyers Products, their #3371809035A hitch will fit a 4500 / 5500 Top Kick as long as it has the same 34 inch measurement inside to inside of frame.

view full answer...

Answer 2

I would be happy to help you with that. I went out to the warehouse and took some measurements of the Buyers Products Hitch Plate with Receiver Tube - Chevy/GMC item #3371809065. The distance between the two wings on the top outside edge of the…

view full answer...

Answer 3

34 inch frame hitch fits are for the cab and chassis model trucks. The part #C15312 does not fit cab and chassis model trucks so it would not be a fit for a 34 inch frame. The part #C15800 is an example of a Curt hitch that does fit a 34 inch wide…

view full answer...

Answer 4

I have a solution for you but the Buyers Products Hitch Plate with Receiver Tube - Chevy/GMC item #3371809065 will not fit your 2002 GMC W4500 Forward. You will need to use one of our universal hitches like the Draw-Tite Ultra Frame Service Body…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 10

Thanks for reaching out, Adam! The Buyers Products Hitch Plate with 2" Receiver Tube #3371809060A is designed to fit a Ford chassis, and all of the other HD hitches like this from Buyers Products. For your application you need a universal…

view full answer...

Answer 11

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 12

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Could Buyers Products Hitch Plate Chevy/GMC # 3371809065 Fit 2009 Chevy Silverado with Dump Bed

Product Page this Question was Asked From

Continue Researching