Brake Controller Recommendation for 2019 Ford F-250

Question

Question:

Which brake controller would you recommend for my 2019 Ford F-250?

asked by: Cliff

0

Expert Reply:

For your 2019 Ford F-250 the Prodigy P3 part # 90195 is the best option for your truck. This controller uses an internal inertia sensor to determine how much braking your tow vehicle is applying and applies a matching amount of braking power to your trailer. Then to install it all you need is the part # 22292 which is custom fit for this controller and your truck so it will make for a very simple install.

expert reply by: Jameson C

0

Answer 1

Yes, we do have a hitch and wiring harness available for the 2023 Kia Telluride. The etrailer Hitch item #e45ZR is confirmed to fit the 2023 model. It is custom fit and bolts directly to your Telluride with included hardware. This is a class III…

view full answer...

Answer 2

The Tekonsha Prodigy P3 #90195 Trailer Brake Controller does not need to be programmed to your 2019 Ford F-250, you simply need to set it up as you would any controller.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

I do have a solution for your 2024 Kia Telluride that has the LED taillights that does allow it to have both a 4-way and 7-way plus install a brake controller but it is not with the #TK74CR which does not work for you based on the LED taillights.…

view full answer...

Answer 7

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

You do have the option to utilize the air brakes on your 2023 Freightliner Cascadia to control electric trailer brakes using the Hayes Air Actuated Trailer Brake Controller, part #HA100400C. However, we mostly recommend just using an electric brake…

view full answer...

Answer 11

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 12

There is one hitch available for the 2023 Kia Telluride. It is the etrailer Hitch item #e45ZR. This hitch is custom fit and bolts to your Telluride with included hardware. I confirmed with the manufacturer this also fits the 4WD models. I really like…

view full answer...