Replacement Bolts for Curt Trailer Hitch # C13105 on 2018 Toyota Sienna

Question

Question:

Just bought the Curt # 13105 hitch for my Sienna from a neighbor but don't have the mounting hardware. What size bolts does it use? Do you offer the hardware kit?

asked by: Michael C

0

Expert Reply:

The Curt Trailer Hitch Receiver # C13105 that you referenced, which is confirmed to fit your 2018 Toyota Sienna, uses six M12-1.25 x 40 hex bolts and six 1/2 inch conical toothed washers for installation. We can indeed provide you with this hardware kit with part # RHK. Once on the product page simply select "Curt" in the dropdown menu and type in "C13105" in the part number text box. We will then send out all the needed installation hardware for this hitch on your vehicle.

I have attached an installation video and the written instructions that you can also use for reference.

expert reply by: Chris R

0

Walter

5/18/2020

PLEASE what is the size for the hitch installation in my sienna Toyota 2011, I. Red the screws and the 2 nuts , could you tell me the right size and if you have the set the price, thanks

Reply

Chris R.

5/21/2020

If you have the same Curt # C13105 mentioned above (which is a fit for your 2011 Sienna as well), the bolt and washer size is the same. You can obtain a full replacement set using the Hardware Kit # RHK. Pricing is listed on the product page. If you have a different hitch model just let me know.

Reply

Walter

5/21/2020

Do you send the kit wrong I need the screws and waste for install the sienna. 2011 hitch, this need 3 screws for each side and washers normal and pressure ones for each screws, total of 6 degrees and 6 nut wash normal and 6 pressure washer, the code you did send me is 4 screws only and very short .thanks ease let me know if do you have this kit to install my tow bar hitch in my sienna 2011 thank s again.

Reply

Chris R.

5/24/2020

The picture on the # RHK product page is just a sample image - it's not actually what the kit for the Curt hitch on your Sienna consists of. We use this part number for the replacement hardware kit of every hitch we have available - but as soon as you type in the hitch model number (C13105) inside the text box provided and select "Curt" in the manufacturer drop-down menu, we will send you out the exact kit for this hitch on your vehicle.

Reply

Answer 1

If you want to install the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13182 on your 2016 Jeep Grand Cherokee, you will use M14 bolts that are grade 5 as well as compatible flat washers. That is the replacement for what is…

view full answer...

Answer 2

In all likelihood you will not have to tap the holes on your 2006 Toyota Sienna to get the hitch bolts to fit. Usually the issue is that the weld nuts on the vehicle will get packed with grime and corrosion and all you will have to do is clean them…

view full answer...

Answer 3

It sounds like you have corrosion compacted in the weldnuts on your 2009 Toyota Sienna. All you can do is spray the lubricant, let it sit from about 15 minutes, and then go at the weldnuts with a wire brush. Do this repeatedly. If that doesn't…

view full answer...

Answer 4

The Curt trailer hitch part #C13105 comes with all of the install hardware needed, but the bolts are size M12-1.25x40 hex. If you need the replacement hardware you would want part #RHK. If you enter the part number on this product page we will ship…

view full answer...

Answer 5

The wiring harness I recommend for your 2008 Toyota Sienna is the Tow Ready T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118304. I recommend this custom wiring harness because it will offer the simplest installation. The…

view full answer...

Answer 6

According to the instructions, the bolts for hitch part #75237, are M12 x 1.25 x 40MM bolts. If you do not have a metric tap and die set, I would just take one of the bolts to a hardware store and match the tap to the bolt.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Replacement Bolts for Curt Trailer Hitch # C13105 on 2018 Toyota Sienna

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching