Availability of LaSalle Bristol RV Sewer Fittings

Question

Question:

Do you have a Bristol NSFUS DWV ES! V 1.5-3 CAV 1 Tank Gray water transition fitting ABS for a 2016 Thor Vegas 24.1

asked by: Harold

0

Expert Reply:

I have attached a list of all the sewer fittings we offer from LaSalle Bristol for you. I was not able to identify the specific fitting you inquired about but if you can send me a photo, I will try to see if we have the proper replacement for you.

expert reply by: Conner L

0

Answer 1

The two things you mentioned refer to the wall thickness of PVC. So to answer that question the #T1002A that you referenced has an inner diameter of 2 inches and an outer diameter of 2-3/8 inches on both sides. For more info check out the review…

view full answer...

Answer 2

The Valterra Waste Valve part #T1002B is for 2 inch hose but since one side is designed to fit over the hose and the other side for inside the hose one side has an internal diameter of 2 inches and the other has an outer diameter of 2 inches.

view full answer...

Answer 3

The difference between the Valterra RV Waste Valve #T60, and the Valterra RV Waste Valve #T60A, is that #T60 is a 3" Hub, and #T60A is a 3" Spigot. The difference between a spigot and a hub, is that a spigot is something that is to…

view full answer...

Answer 4

Since your current pipe has a 3-1/2 inch outer diameter it most likely has a 3 inch inner diameter (measure this to be sure) which would mean that you'd need a 3 inch spigot to lug fitting adapter like part #T1029-1 as this will slip into…

view full answer...

Answer 5

Hey Gene, we don't have that exact one you're looking for but we do have the Vitrifrigo C85i RV Mini Fridge with Built-In Freezer #VT34FR which is 3.2 cubic feet, runs off of 12V power, and does include a built in freezer.

view full answer...

Answer 6

The overall width of the cam end of the Waste Master RV Sewer Hose #LC359724 is 5-5/8 inches with the cams closed. The hose is a standard 3 inch diameter hose. But it sounds like what you really need is an extension such as #CAM39572 which will…

view full answer...

Answer 7

I called the Tech Rep at Dometic to verify and yes, the Dometic Full-Timer, #DOM29FR (510H model) is a direct replacement for the Dometic Sealand 210. There is no need for an adapter plate, it will fit where a 210 is currently mounted.

view full answer...

Answer 8

We do have a 3 inch waste valve for a black water tank that allows you to use a cable; the Valterra valve we offer has a drilled stem that allows you to attach your cable. What you are looking for is the following: - Valterra Bladex Waste Valve Body…

view full answer...

Answer 9

I went out to our warehouse to take a few measurements on the Rhino-Rack Mounting Kit for Batwing and Foxwing Awnings #RR31103. The brackets have an overall width of 2-3/8 inches. The shorter portion has a length of 3-3/4 inches down to where it…

view full answer...

Answer 10

I measured the channels on the Rhino-Rack BatWing awning #RR33100 for you. From the center of one to the center of the other it is 4 inches. From either the top or the bottom to the center of the nearest channel is 1-1/2 inches. I have included a…

view full answer...

Answer 11

Dual waste valves, such as the Valterra #TR38A, are nearly generic by nature. This one has the standard 1-1/2" gray water gate and standard 3" gate, and has a "Y" shape. You should also look at the Bristol #34466ND13AAR Double…

view full answer...

Answer 12

The Valterra Eccentric Tank Reducer, part #T1041-1, is installed with cement. When you reinstall the new one use #A05-0303. The cement is permanent so you're not going to be able to break it up. Instead you need to cut the pipes after removing…

view full answer...

Availability of LaSalle Bristol RV Sewer Fittings

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching