Replacement Valterra 3" Waste Valve Seals/Gaskets and Hardware

Question

Question:

I need gaskets for 3 inch valterra waste valve it is on 1989 Aljo model Tl Vin number. Lsy200g24kbool834 Which gasket set would this take

asked by: Ed H

0

Expert Reply:

Since you have 3 inch Valterra brand waste valves you can use Replacement Seals and Hardware for 3" Valterra Waste Valves # T1003-7VP. This is the only set available for 3 inch Valterra valves.

expert reply by: Michael H

0

Answer 1

For your 2018 Ram 2500 with the factory puck system the best 5th Wheel Hitch is the B&W OEM Companion. If you have the 8 foot bed then you will want the fixed 25K #BWRVK3600 and if you have the short 6-1/2 foot bed you will need the 20K Slider…

view full answer...

Answer 2

We have two different sets of 3 inch waste valve seals. We have the part #T1003-7VP which is for the new style Valterra valves and the part #T1003-9VP which fits the older style

view full answer...

Answer 3

For the Valterra #TC372 the bolt pattern is 3-3/4", and the overall length, minus the protrusion, is 13-7/8". For the Valterra #TC172 the bolt pattern is 2-1/2", and the overall length, minus the protrusion, is 9-1/4". I have…

view full answer...

Answer 4

The standard Valterra replacement valves like the part #T1003PBC are designed to attach to a remote handle that's further away while the Valterra Bladex like part #T1003VP the handle is right at the valve instead. Both valves are interchangeable…

view full answer...

Answer 5

If the outside of the mounting tabs for a baby moon cover on your wheel measures 10-1/4 inches then the Baby Moon Cover part #AM981306 will fit and work well. These have an inner diameter of 10-1/4 inches. Normally these will only fit 6 lub wheels so…

view full answer...

Answer 6

There actually isn't any way for us to know what length of cable you need when replacing the black water valve on your 2018 Montana Legacy 3130RE so you would need to either take some measurements or make an educated guess. The good news is there…

view full answer...

Answer 7

Looking at the picture you provided it's either the Valterra Street DWV Fitting for RV Sewer System - 90 Degree - 1-1/2" Spigot to 1-1/2" Hub Item #D50-2880 or Valterra Street DWV Fitting for RV Sewer System - 90 Degree - 3" Spigot…

view full answer...

Answer 8

The plan you have sounds logical, I contacted the manufacturer to inquire about any additional information they may have that would assist in addressing the issue with your LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank,…

view full answer...

Replacement Valterra 3" Waste Valve Seals/Gaskets and Hardware

Product Page this Question was Asked From

Continue Researching