bing tracking image
Q & A Icon

Troubleshooting Error Message with Titan BrakeRite I Plug and Play Electric Hydraulic Actuator  

Question:

Ive hooked up the BrakeRite Plug and play to my trailer. I got the trailer fault message on a 2016 Tundra and 2015 GMC. I also noticed the turn signals are reversed. When I unplug the trailer to plug and play connection, and only have the 7 pin connected to the truck, no fault and the brake controller will lock the brakes up. Is there a diagram available for how the 7 pin female connection is wired on the plug and play? Thanks

0

Expert Reply:

The female end of the 7-Way harness included with the Titan BrakeRite I Plug and Play # T4813102 that plugs into the trailer features standard 7-Way wiring. I have attached a diagram of how the connector is wired that you can check out.

Since you received an error message when hooking up the unit and trailer to two different trucks, there might be an issue with the trailer side 7-Way. I recommend inspecting the 7-Way on your trailer for any debris or corrosion inside the pins that needs to be cleaned out. Also check to make sure that the wiring coming out behind the connector is in good condition without any pinched or exposed areas.

If you still aren't able to locate and resolve the issue please let me know and I will be happy to look into this further.

expert reply by:
0
Chris R
click to enlarge

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>