Will Spare Tire have to be Moved to Install Curt Trailer Hitch 13028 on a 1985 Chevy C-10 Short Bed
Question:
Will Part #13028 require spare tire location modifications for my 1985 C-10 short bed standard bumper fleetside P/U?
asked by: George L
Expert Reply:
I will be happy to help you out. Curt trailer hitch # 13028 for your 1985 Chevy C-10 will likely fit without modifying the spare tire hanger/location provided that the tire size is a stock size and not an aftermarket larger size. If it is a larger than stock size then it is possible that modifications would need to be made or the spare would need to be carried in the bed of the truck. Thus far no one has complained about the spare tire being an issue.
If you plan on doing some towing you can add a 4-Way connector using # HM41115. If you need a 7-Way AND a 4-Way you can then install # ETBC7. And if you need a brake controller for trailers with electric brakes I recommend the P2 # 90885.
I also recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
Products Referenced in This Question
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Hopkins
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 6000 lbs GTW
- 10000 lbs WD GTW
- 2 Inch Hitch
- 1000 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Availability Of TLC65 Trimax Trailer Wheel Chock and Lock With A23456 Keys
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Wiring Diagrams
- Q&A: Dimensions of Hitch Opening of Curt Hitch #13028
- Q&A: Side Plate and Bolt Hole Spacing Measurements for Curt Trailer Hitch # C14082
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Curt Trailer Hitch Receiver # C14082 Tube Height From Mounting Flange For 1973 Ford F-100
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Will Curt Hitch Fit 1986 Chevy Short Bed Pickup
- Q&A: Bolt Hole Spacing of Curt Class IV Hitch Receiver 14082
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)