Darby Turbo-Rack Universal Single-Bar Roof Rack
(47 reviews)
Price: $56.59
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (47)
- Q & A (0)
- Photos
Darby Roof Rack - DTA968
- Complete Roof Systems
- Darby
- Black
- Overhang
Universal-fit, quick-mount, easy-to-remove roof rack makes cargo control a snap for any vehicle. Foam pillars hold the sturdy, steel crossbar in place without scratching your paint. Strap-on design guarantees simple installation and adjustable fit.
Features:
- Removable rack creates convenient, temporary cargo solution for your vehicle
- Strap-through design makes installation quick and easy
- No tools necessary
- Powder coated steel support bar is sturdy and durable
- High-density foam pillars won't scratch your vehicle's roof
- Universal fit for nearly any application
- Adjustable, telescoping crossbar and tie-down straps
- Single-rack design is expandable
- Add another Turbo-Rack for a complete roof-rack system
- Pair with Darby's Extend-A-Truck load extender (sold separately) for long loads that need extra support
Specs:
- Application: universal
- Bar length retracted: 45"
- Bar length expanded: 60"
- Capacity: refer to your vehicle's manual for roof capacity
To install, simply set the crossbar and foam pillars in place on top of the vehicle. Then, open the doors and run the strap through the interior of the vehicle. Secure the strap with the included cambuckle.
968 Darby Industries Turbo-Rack
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Did not fit
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Darby Turbo-Rack Universal Single-Bar Roof Rack - DTA968
Average Customer Rating: 4.3 out of 5 stars (47 Customer Reviews)
Universal-fit, quick-mount, easy-to-remove roof rack makes cargo control a snap for any vehicle. Foam pillars hold the sturdy, steel crossbar in place without scratching your paint. Strap-on design guarantees simple installation and adjustable fit.by: Andrew08/19/2019
The product works just as needed and was received on time with next day shipping. I’m sure the combo hitch package will work for your kayaks or boards. It is easy to set up and take down.
I drive really fast on the interstate and back roads and it held up the last three 200 mile trips with my 11’ SUP (stand up paddle board) nose ratchet tied to it. I used the provided strap for the rail/bar.
The brand also has a tail gate extender. (Not detailed in picture.)
by: Richard07/11/2022
I liked the rack, and made a couple of changes. I added different connectors to the roof rack, a more rugged strap attachment and also put a pvc pipe on the rack to act as a roller. The other suggestion is adding a anti rattle clamp in two place, one at the hitch and one at the upper connection. I use it for a canoe carrier, with a tonneau cover on my truck
by: Josh06/15/2021
Excellent product. Exactly as described and good quality. All parts spec’d were included. This was part of a combination of items I purchased, which also included an Erickson Big Bed Tailgate Extender Junior.
I originally ordered a separate combo that was out of stock due to manufacturer issues and Matthew with etrailer customer service was absolutely amazing, helping me understand the issue and find this very suitable alternative, sticking with me and promptly replying to my emails until we found the right solution to my needs. I can’t say enough about the customer service and the products I received. They’ve earned my future business.
by: Jesse 08/24/2023
Very cost effective solution for roof rack. I carry a 60# kayak on the roof and this works well
by: Philip06/04/2018
The product is very good very strong I definitely recommend the only thing is there is a warning in the instructions about side airbags which I do have didn't realize that when I bought the product but I will use anyways I will take the risk.
by: Grace11/25/2017
I have used once and it is really the only option I could find for my convertible. Did ok, could be a little higher and I'm not crazy about the S hooks. But so far so good. Overall happy for a solution for my kayak.
by: Jeff 06/22/2020
This adjustable bar with my trailer hitch load carrier work well together for carrying really long loads on my truck.
Jeff
6/23/2021
Still holding up.
by: David12/28/2019
Used it to carry a kayak for a three-month trip with the front of the kayak on this bar and the rear tied down to the tailgate. It 'worked' but often came looser and slipped backwards. Straps can damage the rubber window moulding and the tiny z-clamps periously bend and risk loosing the strap when really pulling it tight. We got through the trip with some constant attention, but not a solution we're going to repeat. I didn't expect much as it was a cheap solution. Threw it away afterwards.
by: Rene 07/06/2023
the product is simple but effective. Good thinking on some ones part.
by: Martin 08/21/2023
This is my second one. They work great.
by: John07/08/2018
I purchased the rack with the extend a truck. Unfortunately after 4 uses the strap that holds the roof rack bar became weak at the clamping point and I wasn’t able to secure the rack properly. Is there any other heavy duty straps or replacement straps? I was suprised as this strap seemed very low quality for the application it is used for.
by: William Murphy04/16/2013
Both turbo rack and bed extender were easy to put together and install on my F-150. Lining up the t-bar level with the roof rack was simple and both lined up well. The extender is fairly loose in my standard truck receiver but is a common problem and will just add a tie down strap to secure it better. Good products....
by: David04/27/2013
The concept is really great for people like me who own a car a little bit tricky to put a roof rack on put the round bar is not a good idea, i had to drill a hole and put a bolt through the J and the round bar because the J's spin around the round bar. The same thing with a square bar would be a lot better, excellent in fack.
by: Brad07/19/2019
This is a pretty flimsy product. I bought it for mounting kayaks, but it is not sturdy enough. I would only use this for mounting lightweight and inexpensive items that you are carrying short distances. There is a lot of wobble to the round bar because of it's particular two-piece design (if you have a short width to span on your vehicle, you might not have as much wobble, noise or bend to the bar, but my setup had it extended as far as it would allow). Also, the webbing strap is very thin. I've used other straps of similar thinness and quality that have failed, so I decided not to take the chance with these straps. I'm returning the product but if I were to keep it, I'd use the foam pieces but replace the bar and strap with something much more sturdy.
by: marc cline09/29/2015
I have not used the product yet, however I have mounted the crossbar and everything looks great. I know I will have no problem with the kayak I plan on carrying. I really appreciate how fast the product got to me. I was told I would not get it until thursday or friday and it came today (Tuesday). I will definitely order from etrailer again and let my friend know about you as well. Thanks again,
Marc
by: Johnny Sumrall04/05/2012
met my expectations. I would like some tie brackets on the frame adding perhaps a roller for ladder or material handling, I would like tie downd on the car top bracket. I have put both into sevice hauling a long ladder I use for inspections.
by: John03/19/2013
Shipping was very fast! I have not used either product yet, but I did mount both of them to check for quality. They seem like they will work fine for picking up lumber and hauling my 14' canoe. My only concern are the gaps in the welds on the extend-a-truck. It still seems sturdy but I will check it periodically. Overall, I'm pleased with this purchase and etrailer.com
by: Craig A.04/02/2020
Very insecure way to strap down a canoe. The s-hooks pop out of the tube. I could not tighten the straps enough to keep the rack in place. I travel thousands of miles each year with my canoe and I would never rely on this rig to carry my boat.
by: chuck l03/28/2019
used in tandem with the bed extender and is easy to install and remove. very stable when strapped down per instructions,
by: Jay V.06/18/2016
Used it on my Ford f150 super crew for a 17ft aluminum canoe. Quick installation and did what I needed it for. Only complaint, is that the rubber pads did shift at little during bumpy turns. I would recommend product, service was fast and painless.
by: Raymond02/12/2013
Roof rack and load extender are great! Shipping time was excellent. I actually received the items quicker than expected.
Thanks for the great service and product!
by: Everett06/18/2020
Box arrived torn partially open upon arrival, with lose bolts found in the corners of the box. Fortunately, all parts were accounted for.
by: Celia W05/14/2015
Nice product. Maybe a bit pricey for what it is, but it is universal. I am using it on the back boot of my Citroen 2CV and have it set to the minimum length. The foam pad supports are sturdy and soft enough to not scratch the paint. I ordered these and had them at my door within a week.
by: Donna08/22/2020
Adjusts well to truck roof. Took a long time to get delivered. Got good help from Adam E at e-Trailer and was resolved.
by: James K05/12/2017
Timely delivery. I received my rack and extender and promptly put 'em on. My canoe fit fine and rigged 2 hangers for kayaks without any problems. Gear hauled solidly. Very pleased.
25
47
Show More Reviews
See what our Experts say about this Darby Roof Rack
- Roof Rack Crossbar Installed Forward of Factory Roof Rails for 2012 Toyota 4RunnerWe do offer a solution to install a roof rack crossbar forward of the roof rails on your 4Runner, the Darby Turbo Rack, part # DTA968. Because all models of the 2012 Toyota 4Runner were equipped with the roof rails running along the edge of the roof, none of the roof rack manufacturers (including Yakima) have developed a clip style attachment that would allow you to install a roof rack crossbar forward of the factory rails. If you click the provided link, you can see how the rack works.
view full answer... - Does the Darby Turbo-Rack Universal Single-Bar Roof Rack Make Noise or Whistle at Highway SpeedsWe have not had any customers or testing that reporting wind noise or whistling of the Darby roof rack, # DTA968. However, any time you place something on the roof of a vehicle, there will be some noise. Also, round bars do have the tendency to whistle. For a more quiet roof rack, I will be happy to make some recommendation if I can get the year, make, and model of the vehicle.
view full answer... - Recommended Single Bar Roof Rack for a 2017 Honda RidgelineThe most cost effective option we offer to add a single crossbar to a 2017 Honda Ridgeline with bare roof is the Darby Turbo-Rack Universal Single-Bar Roof Rack part # DTA968.
view full answer... - Is There a Single Bar Roof Rack for a 2020 Ram 1500 ClassicThe only type of single bar roof rack option we have for a 2020 Ram 1500 Classic is the Darby Turbo-Rack Universal Single-Bar Roof Rack part # DTA968. The custom fit options like from Yakima and Rhino-Rack are only offered in pairs.
view full answer... - What Roof Rack Fits Both 1973 BMW 2002For 1970s vintage vehicles there are few options for multi-fit roof racks. Most manufacturers fitment guides do not go that far back. You will be best served by a universal fit rack, such as the Darby Turbo-Rack Universal Single-Bar Roof Rack, part # DTA968. This part is sold as a single bar, so for a typical installation you will need to order two of these. The universal fit system uses a steel support bar that can telescope from 45 inches to 60 inches and foam pillars with a strap to...
view full answer... - How to Mount a Cargo Box on the Roof of a 2013 Ford Explorer Police EditionI do still have a way for you to affix the cargo box to the roof of either a 2013 or 2014 Ford Explorer but since it is the Police edition which has the factory side rails removed, none of the aftermarket roof rack manufacturers (Thule/Yakima/Rhino Rack) make a custom fit system that will work for you. The only option I have is a universal crossbar system that attaches to the roof of your Explorer and secures itself with straps that run inside the vehicle. You will want to use 2 of the...
view full answer... - Adding a Third Roof Rack Crossbar on a 2011 Toyota SiennaRoof rack crossbars and mounting feet have to go in specific places on a vehicle for strength and stability. If your 2011 Toyota Sienna does NOT have the factory side rails that run front to back then the only option is the Darby Turbo Rack # DTA968.
view full answer... - Looking for a Roof Rack to Fit 2015 Chevrolet TraxAt this time the only roof rack that I have to offer for your 2015 Chevrolet Trax is the Darby Turbo-Rack Universal Single-Bar Roof Rack, # DTA968. I have included a short video for you. Please keep in mind that this is for a single bar so you would need two for the standard set-up. Unfortunately, a custom fit roof rack that would just clamp on is not available.
view full answer... - Will the Darby Turbo-Rack Universal Single-Bar Roof Rack Fit a 2012 Kia ForteThe Darby Turbo-Rack Universal Single-Bar Roof Rack, # DTA968, is a universal fit item so there is a high degree of probability that it will fit your Kia Forte The Length ranges from 45 inches to 60 inches which for crossbars is a wide range. For a complete rack, you would need 2 of these. There is no specific weight capacity of the steel bars because they can carry more weight than most vehicle roofs. You will need to consult the vehicle owners manual to determine what the weight carrying...
view full answer... - Fit of Darby Roof Rack # DTA968 on 1998 Honda AccordAs long as your Accord is a 4 door model, the Darby Roof Rack, part # DTA968 should work just fine for you. Keep in mind that the amount of weight that you can place on the rack will be limited by the capacity of the vehicle roof. Check for owners manual for the roof capacity, and be sure not to exceed it. I have linked you to our Roof Rack FAQ page, that has more information about roof racks.
view full answer... - Recommendation for an Inexpensive Roof Rack for a 2004 Chevy Malibu ClassicCustom fit roof racks for a 2004 Chevy Malibu Classic are going to run higher than your current budget but there is another option. You could use the Darby system, # DTA968. This is a single bar so you would need 2. The strap fits inside the car and holds the bar to the roof. Since this is a universal fit item it would not fit as well as a custom fit rack. I do recommend going with a custom fit rack, see link, if at all possible. You will get the best fit and performance.
view full answer... - Is Darby Turbo-Rack Universal Single-Bar Roof Rack # DTA968 Sold in Pairs or IndividuallyThe Darby Turbo-Rack Universal Single-Bar Roof Rack # DTA968 that you referenced is a single crossbar. If you needed two of these you'd have to order a quantity of two of them.
view full answer... - 1/2 Rack for a 2010 Honda Civic SedanThe only type of 1/2 rack we offer for a Honda Civic is universal, the Darby Turbo-Rack Universal Single-Bar Roof Rack part # DTA968.
view full answer... - Will the Darby Universal-Fit Roof Rack # DTA968 Fit on a 2008 Toyota PriusThe Darby Universal-Fit Roof Rack # DTA968, will work on your 2008 Toyota Prius but you will need to order a total of 2. This universal roof rack has adjustable feet and bars to fit a wide variety of vehicles. The adjustable feet can accommodate different width roofs and come in handy if you have a sun roof so you do not place the feet on your sun roof. Be sure you verify the weight capacity of your roof before loading cargo on this roof rack to ensure you do not exceed your roofs weight...
view full answer... - Is the Single Crossbar of the Darby Extend-A-Truck Kayak Carrier AvailableFor just the crossbar that comes with the part # DTA944-968-924 you would want just the part # DTA968. This can fit nearly any roof style so it would fit on your 2013 Chevy Silverado. I attached a review video for this crossbar for you to check out as well.
view full answer... - Availability of Single Darby Roof Rack Crossbar for Truck and How it InstallsFor just the single bar of the # DTA944-968-924 that you referenced you would want the part # DTA968. This installs by running through the interior of your vehicle and strapping there. If you check out the install video I attached you can see just how it installs.
view full answer... - Darby Extend-A-Truck Kayak Carrier for a 2013 Ford F-150 and 2 Hobie Mirage Revolution KayaksYes, you could use 1 of the Darby Extend-A-Truck Kayak Carrier w/ Hitch Mounted Load Extender and Single-Bar Roof Rack # DTA944-968-924 along with an additional bar, # DTA968, to hold your 2 Hobie kayaks. Since the kayaks will be more narrow at the ends the width will not be a problem.
view full answer... - Can Kvh Satellite Dish Antenna be Mounted to Crossbars or Roof of 2014 Ford Taurus According to the installation instructions for the Kvh Satellite Dish that I reviewed online you will require a crossbar spread of 35-1/2" to mount the antenna to a roof rack. However, the roof rack systems available for the 2014 Ford Taurus max out at a crossbar spread of 28 inches, so the dish will not be compatible with your vehicle's short roof. We do offer the Darby Turbo-Rack Universal Single-Bar Roof Rack, # DTA968, (you will need two of these). These bars could be spread to 35-1/2",...
view full answer... - Universal Roof Rack to Carry a Dual Kayak on a 2006 Chevy Cobalt and 2009 Chevy SilveradoYou will not be able to use a custom roof rack for both vehicle since they have specialty parts designed only for a given vehicle. But there is an option that could work for you. You could use 2 of the Darby universal roof rack crossbars, # DTA968. These mount to the vehicle roof via a strap that you run through the vehicle interior. It is not the prettiest set up but it is portable and you will be able to use it on the 2006 Chevy Cobalt and 2009 Chevy Silverado. Be sure to consult the...
view full answer... - What is the Weight Capacity of the Darby Turbo-Rack Universal Single-Bar Roof Rack # DTA968The weight capacity of the Darby Turbo-Rack Universal Single-Bar Roof Rack # DTA968 is determined by the roof capacity of the vehicle you are going to be installing it on. You will need to refer to your owner's manual for the capacity. It will work well with the Erickson Big Bed Junior Load Extender # EM07605.
view full answer... - Roof Rack for a 1975 Ford Maverick to Carry Fishing PolesWe do not have a custom fit roof rack for a 1975 Ford Maverick but I do have a solution for you. You could use the Darby Turbo-Rack, # DTA968. You would need two of these to make a complete 2-bar rack system. You could then use the Yakima FatCat EVO 6, # Y03096, to carry the fishing poles. This carrier is made for skis or snowboards but can also be used for fishing rods.
view full answer... - What Roof Kits are Compatible with the Lexus RX 350?I have a solution for you, but manufacturers do not offer a permanent kit for a Lexus RX 350 without flush side rails. You do have options for a naked roof. These are the Malone Handi-Rack, part # MPG452 and the Darby Turbo-Single Rack, part # DTA968. The Malone Handi-Rack is an inflatable rack system that allows for you to quickly add roof racks to your vehicle. They Include 5 anchor points on the vehicle. It also includes a hand pump for quick and easy inflation. The Darby Turbo-Rack...
view full answer...
- Could a Pair of the Darby Turbo-Rack Universal Single-Bar Roof Rack # DTA968 Transport a PortaboteAs long as you stay under the weight capacities for the roof of your Ram 2500 yes, the Darby Turbo-Rack Universal Single-Bar Roof Rack # DTA968 that you referenced would work for you to transport your 10 foot portabote. Like you said you would need a pair of these. Since your Portabote folds down a surf board carrier like the Thule Express Surf Strap # TH531 would work well. See attached review video.
view full answer... - Can a Ski and Snowboard Rack Be Installed on Darby Roof Rack # DTA968The Darby Roof Rack, part # DTA968, will accept a ski rack that would attach to round crossbars, like the Yakima FatCat EVO6, part # Y03096. I am including a link to a list of ski and snowboard carriers that will attach to round crossbars. You would need 2 of the Darby bars. The weight capacity on the Highland roof rack is determined by the roof capacity of the vehicle it will be installed on. The roof capacity can be found either in your owners manual or from the vehicle manufacturer....
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Patrick B
Installed by:
Matthew K
Installed by:
Cole B
Updated by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Andrew
8/20/2020
This has been working out perfectly the last year. foam blocks do show some wear after multiple uses in extreme desert heat. Since I drive very fast I never trusted the straps it came with due to uplift so I started to add two black adjustable hole rubber straps from Home Depot as a backup. My truck doors closes properly with it. Provided straps work too by themselves when driving around speed limit coming down a windy hill.