bing tracking image
Q & A Icon

Extension Hose from ASME Tank to Propane Regulator  

Question:

All of the ports fit our rv just fine but we dont have room to keep the connections from the propane supply tank, to the propane regulator, in line. We need an extension to go either from the regulator to port B on the Tee or the propane supply tank to port A with at least one or two feet of hose. Can you help us? Port A (excess flow soft nose P.O.L.) connects to motorhomes permanent propane supply. Port B (female P.O.L./Male Acme Thread) connects to motorhomes propane regulator. As you can see our setup is backwards with very limited space.

0

Expert Reply:

I do have an option for you but as your propane setup is not standard to say the least, we do not have any direct extensions that will work for you without you having to use several adapters which we do not carry. Therefore, your best option would be to extend the supply line from your propane tank to your regulator. For this, you will want to use the MB Sturgis Sturgi-Stay Propane Fill Hose part # 100019-36 for 3' long or part # 100019-60 for 5' long. These lines have a male POL which should attach to your ASME tank and a 1/4" male inverted flare which should attach to your propane regulator but you will want to use the attached article to make sure these are the fittings you have.

expert reply by:
0
Conner L
click to enlarge

Products Referenced in This Question



Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>