Size of Hardware Needed to Install Trailer Hitch on 2010 Chevy Equinox

Question

Question:

Bolt size to attach hitch to the 2010 equinox

asked by: Daniel S

0

Expert Reply:

The size bolts that come with the Draw Tite hitch part # 36408 that you referenced is M12 and 1/2-13. We offer a way to order replacement hardware for this hitch as part # RHK. You'd need to enter the part number of the hitch and select the brand from the manufacturer and we'll ship you out the correct hardware.

expert reply by: Jameson C

0

Answer 1

What we can do is provide you with the bolt size that is used to install the part #36408 that you referenced and you can find a tap at a local hardware store to clean the threads out if you think they are too corroded. The bolt size is M12 CL8.8. I…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

Good morning, Rich. I do have one resource which you should find helpful. I am sorry to say that at this time we do not have any pictures of videos of the Curt #C62ZV hitch being installed on a Cadillac Lyriq. Reason being we have not had this…

view full answer...

Answer 8

Yes it does indeed fit; if you take a look at the accompanying photo, you can see the Curt trailer hitch installed on a 2024 Chevy Trax ACTIV. The correct part number for the hitch is the following: - Curt Trailer Hitch Receiver #C75VV

view full answer...

Size of Hardware Needed to Install Trailer Hitch on 2010 Chevy Equinox

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching