How Much Does the Rock Tamers Heavy-Duty Adjustable Mud Flap System Part # ERT00108 Weigh

Question

Question:

Overall weight of system? Just want o know to include in my overall tongue weight set up. Thanks in advance.

asked by: Barb

0

Expert Reply:

The Rock Tamers Heavy-Duty Adjustable Mud Flap System part # ERT00108 weighs around 35 lbs.

expert reply by: Conner L

0

Answer 1

The RhinoEXTREME RV Sewer Hose Extension part #CAM39863 has a collapsed length of about 5' 6" it compresses almost 50% of its extended size.

view full answer...

Answer 2

The Blue Ox SwayPro Weight Distribution System part #BXW1006 weighs around 95 lbs. It will actually become part of the vehicle's frame once installed therefore does not count towards tongue weight capacity. Please keep in mind that this…

view full answer...

Answer 3

The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I…

view full answer...

Answer 4

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 5

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 6

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 7

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 8

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 12

The amount of bow that's put into trailer axles like the #7359765 is based on about how much a trailer is typically going to weigh that has a 3,500 lb capacity. So there's a bit of approximation and obviously it can't be totally perfect…

view full answer...

How Much Does the Rock Tamers Heavy-Duty Adjustable Mud Flap System Part # ERT00108 Weigh

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching