Titan Brakerite II Break Away Battery Charging
Question:
Hello, I just completed installing the hydraulic disc brakes to my trailer and I am concerned the two supplied batteries are not being charged when hooked to the tow vehicle. I have measured the voltage at the batteries to be 12.65v. When hooked up engine running to the tow vehicle voltage does not change at the break away batteries. I have measured 13.8v both at the vehicle plug and the input side of the Brakerite SD module. I find no voltage at the module side of the break away battery connection of the SD module. Are the break away batteries designed to be charged/maintained by the tow vehicle through the SD module or should I run alternate power to the batteries bypassing the module?
asked by: Doug K
Expert Reply:
The Replacement Remote Mounted SD Control Module for BrakeRite II # T4834200 is intended to be installed as shown in the attached diagram. The 12V charge from the 7-way will only help to charge the trailer batteries and breakaway batteries at a maintenance charge amperage. The batteries need to be initially charged on a separate charger like # 329-GENIUS5. The 7-way maintenance charge will not be able to charge a dead battery but only slowly charge a mostly charged battery to maintain its charge.
You do not need to run alternative power to the breakaway batteries.
Products Referenced in This Question
NOCO Genius Smart Battery Charger - AC to DC - 6V/12V - 5 Amp
- Battery Charger
- Battery Charger
- ATV
- Boat
- Car/Truck/SUV
- Generator
- Jet Ski
- Lawn Mower
- Motorcycle
- RV/Camper
- Snowmobile
- Trolling Motor
- 120 Ah
- Charges/Maintains
- 6V
- 12V
- Wall Outlet to Vehicle Battery
- NOCO
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: 4834200
- Shop: Bearing, 42MM Nev-R-Lube 42MM x 76MM x 39MM
- Shop: 50MM Nev-R-Lube Bearing for 8,000-lb Dexters - Qty 1
- Search Results: 4813100
- Search Results: 31~71~3
- Shop: Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Trailer Hitches
- Search Results: 30868
- Shop: Brake Controller
- Search Results: 51200
- Shop: Curt Echo In-Line Bluetooth Brake Controller w/ OneControl App - 1 to 4 Axles - Proportional
- Shop: Curt Echo Wireless Brake Controller - 7-Way Plug Mount w/ Bluetooth App - 1 to 2 Axle - Proportional
- Shop: Dexter BrakeRite II Electric Over Hydraulic Actuator Kit - Vented - 1,500 psi
- Shop: Replacement Dexter BrakeRite II SD Electric Over Hydraulic Actuator - Vented - 1,500 psi
- Q&A: Troubleshooting Brake Rite Disc Brake Electric over Hydraulic Actuator On 2018 Ford F-450
- Search Results: brakerite sd
- Search Results: t4834200
- Q&A: Will 2022 GMC Sierra With Factory Brake Controller Require Hydrastar EOH Adapter
- Q&A: Can Control Module on Titan BrakeRite II SD be Replaced
- Q&A: Troubleshooting Titan BrakeRite Electric Over Hydraulic Brake System Not Building Pressure
- Q&A: Can Trailer Be Towed if Battery in Breakaway Kit is Dead
- Q&A: Where Does 3rd Wire On 3-Wire Breakaway Switch Get Connected To?
- Q&A: How to Wire the Titan BrakeRite EHB Electric-Hydraulic Actuator for Disc Brakes Part # T4813100
- Video: Dexter BrakeRite Electric Over Hydraulic Actuator Manufacturer Interaction
- Video: Review of Titan Brake Actuator - SD Ford/Chevy Brake Controller Adapter - T4845900
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Video: Bright Way Trailer Breakaway Kit with Switch Review
- Video: Review of Bright Way Trailer Breakaway Kit - Kit with Charger - 3802339
- Shop: Roof Rack
- Shop: Tonneau Cover
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)