Replacement Door and Baggage Locks Keyed Alike For Single Key Function

Question

Question:

I have a 2016 Forest River two-man door bumper pull RV three basement doors as well as a 2017 Yetti fishing wheel house with one man door and a -down rear toy hauler style. They currenlty both have Global Link Keys. There are 7+ keys for these two trailers. Can I buy cylinders for the latches and deadbolts as well as the basement door locks and have them all one key? I wouldnt know what to measure to ensure compatibility...

asked by: RANDY S

0

Expert Reply:

The cylinders for the latches need to be measured for length to get you the correct replacements. For instance we have the Replacement Cam Lock Cylinder for RVs - Keyed Alike Option - Stainless Steel - 1-3/4" Long # 295-000077 and various other sizes like the 1-1/8" Long # 295-000004. I've attached a link to that product page to assist.

With the Global Link brand, they offer the keyed alike option for their lock cylinders, so when placed on the same online order when you select the quantity of each and select the keyed alike option for the slight additional cost from the drop down on each product page, we will make sure all the locks on that entire order match so you will be able to unlock all the locks with the same key.

If you can't remove the lock cylinder from your current latches, then you will need to consider getting the complete assemblies like # 295-000019 and # 295-000078 for instance that when ordered in the same way listed above will be keyed alike.

expert reply by: Jason S

0

click to enlarge

Answer 1

There are 2 possible reasons why your install of the Flexo-Coil Wiring Kit #RM-15267 is causing an error to pop up on your 2021 Jeep Gladiator; the first is that something was installed incorrectly, and the second is that you have the ParkSense on…

view full answer...

Answer 2

If you have a factory steel bumper on a 2022 Jeep Gladiator Rubicon with a factory steel bumper, you need a base plate, a tow bar, a tow braking system, safety cables, and vehicle tow wiring. You also need additional parts for the battery charger…

view full answer...

Answer 3

The hardware you'll need to install the Global Link Mounting Plate #295-000016 that you referenced is not included as the application determines what you should go with. We don't carry any hardware for it so your best solution will be to…

view full answer...

Answer 4

This is a good question. So it really comes down to preference between the Roadmaster base plate kits that have the crossbar and the ones that do not. The kits like you have #RM-521453-5 without the crossbar are actually reinforced more at the welds…

view full answer...

Answer 5

The correct wiring kit will depend on if your 2021 Jeep Gladiator has ParkSense proximity sensors. If you have these sensors you will need the Roadmaster Smart Diode 7-Wire to 6-Wire Wiring Kit for Variable Voltage LED Tail Lights #RM38FR. If you do…

view full answer...

Answer 6

On the Jeep Wrangler and Jeep Truck models the steering wheel does not actually lock with the ignition in the off position, it just has a loss of power steering-which is likely what you're experiencing. Jeep removed the steering wheel lock from…

view full answer...

Answer 7

The Global Link Locking Baggage Lock Actuator Set with Mounting Plate part #GL34FR comes with a specific key and lock, coded as 391. Therefore, if you order multiple they will all come with this same key but you don't need to do so all at one…

view full answer...

Answer 8

The cutout size normally used for installing baggage door slam latches like the part #295-000015 is 3-1/2 inch by 3-1/2 inch. You'll also need to use the mounting plate part #295-000016 but you'll also need to verify that your door is thicker…

view full answer...

Answer 9

The Roadmaster Crossbar Base Plate part #RM-521453-4 is a fit for your 2021 Jeep Gladiator and is compatible with all Roadmaster tow bars including the Stowmaster #RM-501 you have.

view full answer...

Answer 10

The EZ5, part #RM-521453-5 won't utilize the crossbar on the tow bar, which leads to a quicker, cleaner installation, hook up and removal process. If you're using a motorhome mounted crossbar, this is what you should use unless you have the…

view full answer...

Answer 11

The reason the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5 for your 2021 Jeep Wrangler Unlimited does not use a crossbar for the tow bar is due to the design of the removable arms that connect directly to the tow bar instead of requiring a…

view full answer...

Answer 12

From the images you attached, it appears you have what is typically used as a baggage/storage door latch. Because our entry door latches are designed for common RV door thickness of greater than 1", I suggest the Global Link Locking Baggage Lock…

view full answer...