Trailer Hitch with Higher Capacity than Factory Hitch on a 2018 Ford F-150
Question:
I have a 2018 F150 5.0 liter that shows a GCWR of 14400 lbs and Ford says a max towing of 9100 lbs. Msays 5000/500 Weight carrying and 11600/1160 WD. Is it safe to use this hitch or should I get the Curt C14016? I am also interested in a recommended ball mount and how much different the height of the Curt C14016 is than the OEM hitch height? Currently a 4inch drop is needed for my dump trailer and a 7000 lbs. utility trailer I pull.
asked by: Blair
Helpful Expert Reply:
With your existing hitch on your 2018 Ford F-150 the maximum weight you can tow, even when using weight distribution, is that 9,100 pounds you quoted. If you were to install an aftermarket one such as # C14016 then you would still be limited to 9,100 pounds but would not have to use weight distribution to reach that capacity.
So what it comes down to is whether or not you want to use weight distribution. Since you have 2 trailers you may not want to move the system back and forth between the 2 trailers, assuming that it will fit both, or have to buy 2 systems.
You can avoid that by installing Curt trailer hitch # C14016. When installed the receiver on this hitch will be about 2-1/2 inches below the bottom of the factory receiver (factory receiver stays in place, see picture). If you have to use a 4 inch drop ball mount now then you can switch to a 2 inch drop.
I recommend # C45331 since it has the right amount of drop, includes a 2-5/16 inch ball already installed in the ball mount, and a hitch pin with clip. An excellent value for sure.
Products Referenced in This Question
Curt Heavy Duty Forged Ball Mount with 2-5/16" Ball - 2" Drop - 15,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2-5/16 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Matte Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 15000 lbs GTW
- Class IV
- CURT
more information >
Continue Researching
- Shop: Towing Mirrors
- Shop: K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side
- Shop: Curt Heavy Duty Forged Ball Mount with 2-5/16" Ball - 2" Drop - 15,000 lbs
- Shop: Trailer Hitch
- Shop: Grease Seals 10-36 (pair)
- Video: Choosing the Right Trailer Wiring
- Q&A: 2022 Toyota Highlander Wiring for a 7-Way Blade Connector
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Brake Controller
- Search Results: 68149
- Shop: Trailer Wiring
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Fifth Wheel Hitch
- Q&A: Wheel and Tire Recommendation For Jet Ski Trailer with Tire Size ST175/80R13
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 25580
- Video: Roadmaster Automatic Battery Disconnect Installation - 2020 GMC Sierra 1500
- Shop: Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Search Results: dust cap
- Shop: Brake Controller
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Q&A: Does HBA-CAM Adapter Module for Hydrastar Electric Over Hydraulic Brake Actuators have 2 or 4 Wires
- Shop: Optronics LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 10 Diodes - Red Lens
- Shop: Suspension Enhancement
- Article: Trailer Tire Sizing