5,000 lb A-Frame Trailer Jack Recommendation for RV

Question

Question:

I need to replace my RV Electric Jack and I want to buy one that has replacement parts available Gears stripped on current one. 4500-5000 lb capacity. 12 volt. Parts are my main concern. Can you help?

asked by: William P

0

Expert Reply:

I recommend Stromberg Carlson Electric Trailer Jack # JET-5000. While this doesn't have replacement parts available it's not prone to damage like other jacks are and it carries a 2-year warranty so it will work well for you.

expert reply by: Jameson C

0

Answer 1

The Stromberg Carlson Electric Trailer Jack part #JET-5000 is a great option for you that would work well and would replace your current jack easily. This jack has more capacity AT 5000 pounds. This allows the jack to work less and consequently last…

view full answer...

Answer 2

When picking out a trailer jack based on capacity the relevant weight figure on the trailer is the tongue weight. That's the actual weight that the jack will be lifting. If your trailer was fully loaded it's tongue weight would most likely be…

view full answer...

Answer 3

The Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black, Item #JET-5000, is a great choice for your 2014 Prowler 30XL. You can check your tongue weight to make sure this jack will work for you. It has a…

view full answer...

Answer 4

The Stromberg Carlson Electric Trailer Jack #JET-5000, uses the standard mounting bolt pattern, 3 inches apart on center, so you should have no problem using the existing holes on your 2015 Jayco trailer. I have included a short installation video…

view full answer...

Answer 5

As far as the mounting hole pattern, the Stromberg Carlson Electric Trailer Jack - #JET-5000, has the standard pattern that most all A-frame trailer jacks use so that should not be a problem. You will have to make sure the hole diameter for the jack…

view full answer...

Answer 6

We have an electric A-frame jack that woudl work great with your Keystone passport Elite Trailer. I recommend the Stromberg Carlson Electric Trailer Jack #JET-5000. This jack features a lifting capacity of 5,000 lbs which would be more than enough…

view full answer...

Answer 7

The Atwood Premier Performance Series Power Jack when compared to the Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black #JET-5000 will be slightly slower. The Atwood is a faster jack, but you do miss out…

view full answer...

Answer 8

I recommend Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift Item #JET-5000. It has a lifting capacity of 5,000 lbs which would be more than you'd need but will ensure that the jack will operate quickly and last a long…

view full answer...

Answer 9

For an electric A-frame trailer jack, I recommend the Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black, Item #JET-5000. The Bulldog Powered Jack, #BD500187, would work well on your trailer; however, I…

view full answer...

Answer 10

Thanks for the picture of the a-frame jack mounting bolt hole dimensions you have. Based on that we know you have a standard jack mount on your trailer and the Stromberg Carlson Electric Trailer Jack #JET-5000 you are interested in is a confirmed fit…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

5,000 lb A-Frame Trailer Jack Recommendation for RV

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching