Will Stromberg Carlson Electric Trailer Jack Use Existing Mounting Holes

Question

Question:

I have a 2015 jayco trailer that has a 3500 lb lift capacity. I like your 5000 lb stromberg carlson. Will it fit on my current tongue without having to drill new holes? Thanks,

asked by: Dan R

0

Expert Reply:

The Stromberg Carlson Electric Trailer Jack # JET-5000, uses the standard mounting bolt pattern, 3 inches apart on center, so you should have no problem using the existing holes on your 2015 Jayco trailer. I have included a short installation video for you.

expert reply by: Leah S

0

Answer 1

Thanks for the picture of the a-frame jack mounting bolt hole dimensions you have. Based on that we know you have a standard jack mount on your trailer and the Stromberg Carlson Electric Trailer Jack #JET-5000 you are interested in is a confirmed fit…

view full answer...

Answer 2

The Stromberg Carlson Electric Trailer Jack part #JET-5000 is a great option for you that would work well and would replace your current jack easily. This jack has more capacity AT 5000 pounds. This allows the jack to work less and consequently last…

view full answer...

Answer 3

When picking out a trailer jack based on capacity the relevant weight figure on the trailer is the tongue weight. That's the actual weight that the jack will be lifting. If your trailer was fully loaded it's tongue weight would most likely be…

view full answer...

Answer 4

I recommend Stromberg Carlson Electric Trailer Jack #JET-5000. While this doesn't have replacement parts available it's not prone to damage like other jacks are and it carries a 2-year warranty so it will work well for you.

view full answer...

Answer 5

As far as the mounting hole pattern, the Stromberg Carlson Electric Trailer Jack - #JET-5000, has the standard pattern that most all A-frame trailer jacks use so that should not be a problem. You will have to make sure the hole diameter for the jack…

view full answer...

Answer 6

The Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black, Item #JET-5000, is a great choice for your 2014 Prowler 30XL. You can check your tongue weight to make sure this jack will work for you. It has a…

view full answer...

Answer 7

For an electric A-frame trailer jack, I recommend the Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black, Item #JET-5000. The Bulldog Powered Jack, #BD500187, would work well on your trailer; however, I…

view full answer...

Answer 8

The Atwood Premier Performance Series Power Jack when compared to the Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black #JET-5000 will be slightly slower. The Atwood is a faster jack, but you do miss out…

view full answer...

Answer 9

I recommend Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift Item #JET-5000. It has a lifting capacity of 5,000 lbs which would be more than you'd need but will ensure that the jack will operate quickly and last a long…

view full answer...

Answer 10

We have an electric A-frame jack that woudl work great with your Keystone passport Elite Trailer. I recommend the Stromberg Carlson Electric Trailer Jack #JET-5000. This jack features a lifting capacity of 5,000 lbs which would be more than enough…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...