Recommended 4 Camera System with Quad View Monitor

Question

Question:

Im looking for a 4 camera system that can work w/ a 4 + up to 7 inch rear view mirror. I would like the mirror to be able to show all 4 cameras at the same time. do you have a product like this? Thanks

asked by: Kjones

1

Helpful Expert Reply:

We have the Rear View Safety Backup Camera System - 4 Camera Setup - Quad View Monitor # RVS-062710. This system does not connect to a rear view mirror, but you can mount the monitor wherever you desire. This kit includes all the wires, connections, and mounts. It has 2 cameras with 50 foot night vision and 2 side cameras with 30 foot night vision.

If you will be using this system on a trailer, then I recommend adding the Rear View Safety Trailer Tow Quick Connect/Disconnect Kit - 3 Camera Set Up # RVS-2133 as well.

expert reply by: Jason S

1

Answer 1

No, it really isn't but I have a solution. The MORryde RV Generator Slide Out Tray item #MR79RR is designed to be mounted in storage compartments. It needs a sturdy base to support the weight of your generator and you're not going to be able…

view full answer...

Answer 2

With the size of your Champion Generator 200953(23.4" wide, 27.9" long and 21.7" tall I recommend using the 32x48 Reese Solo Cargo Carrier #PS1040100. This has a 47-3/4" long by 31-3/4" wide inner tray and can support up to…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

We have the perfect solution but the Furrion Vision S W is not compatible with the pre wiring from Voyager. Instead the Voyager WiSight Wireless RV Backup Camera #ASA24YR is the way to go. This will allow you to use the already existing bracket to…

view full answer...

Answer 5

I took a look at the TripleVision system on your 2009 Tiffin Allegro Bus MH, and the Rear View Safety Backup Monitor #RVS-6137Q that you mentioned, and it will actually not work with your current system, unfortunately. This monitor is only designed…

view full answer...

Answer 6

A Furrion camera will only work with a Furrion monitor. Unfortunately, there are no adapters available that will allow you to use it with your existing Triplevision monitor. Since you're looking at a side camera it makes me think you have the…

view full answer...

Answer 7

The best solution for ride quality and stability for your 2017 Winnebago View 24J will be with a SumoSpring #SSA11MTKT installed. This gives better suspension support that translates the best into improved handing, comfort, and support. Scissor jacks…

view full answer...

Answer 8

The replacement screen frames for the trailer roof vent on your 2011 Grey Wolf come in two different colors. For the Polar White you will need part #BVC0573-41. For the Birch White you will need part #BVC0573-31.

view full answer...

Answer 9

I do have an option for you but we currently do not carry the correct replacement for your Coach Step Model 168367. Instead, I recommend repairing the steps you have now as this will be much more cost effective and won't require any drilling. For…

view full answer...

Answer 10

Your outside power door steps are the Lippert brand. That part number is 5041647. I was able to find a replacement step on our website. The Replacement Steps, Motor, and Control for Kwikee RV Electric Steps - 27 Series - 29" Wide, part…

view full answer...

Answer 11

I reached out to Lippert about the Lippert Electric Steps 5041647 on your Tiffin Motorhome and was able to confirm that the correct replacement gear for this is the Replacement Winnebago 5:1 Gearbox With High Torque Motor for RV Steps part #LC22UD…

view full answer...