Recommended Backup Camera System Upgrade For A 2009 Tiffin Allegro Bus With A TripleVision System

Question

Question:

I had a triplevision M70 screen running a backup camera and two side cameras on my allegro bus that has went white. Power to screen is good. Will the screen RVS-6137Q replace the screen I have and work with my original cameras?

asked by: Nathan R

0

Expert Reply:

I took a look at the TripleVision system on your 2009 Tiffin Allegro Bus MH, and the Rear View Safety Backup Monitor # RVS-6137Q that you mentioned, and it will actually not work with your current system, unfortunately.

This monitor is only designed to work with RVS branded cameras, and is not compatible with TripleVision branded cameras.

However, the best solution as I see it, is to upgrade your current system.

A great option that utilizes the # RVS-6137Q monitor that you were looking at is the:

-Rear View Safety Backup Camera System # RVS-062710.

This kit includes 4 cameras with a 120° viewing angle that all display a color image, which is a nice upgrade from the black and white picture on your current system, 1 7" digital TFT LCD color monitor with quad-view, so you can view all 4 camera simultaneously, and also includes all wires, connectors, and mounts.

I know it's not an ideal situation, however since your current system is now obsolete, finding replacement parts is going to prove to be more and more difficult and I believe that you'll find it much easier in the long run to upgrade your system.

I have also included a review video, as well as an installation video on a 2006 Tiffin Allegro Motorhome so you can get an idea of the process.

expert reply by: Bryce D

0

Answer 1

A Furrion camera will only work with a Furrion monitor. Unfortunately, there are no adapters available that will allow you to use it with your existing Triplevision monitor. Since you're looking at a side camera it makes me think you have the…

view full answer...

Answer 2

I reached out to Lippert about the Lippert Electric Steps 5041647 on your Tiffin Motorhome and was able to confirm that the correct replacement gear for this is the Replacement Winnebago 5:1 Gearbox With High Torque Motor for RV Steps part #LC22UD…

view full answer...

Answer 3

Your outside power door steps are the Lippert brand. That part number is 5041647. I was able to find a replacement step on our website. The Replacement Steps, Motor, and Control for Kwikee RV Electric Steps - 27 Series - 29" Wide, part…

view full answer...

Answer 4

I do have an option for you but we currently do not carry the correct replacement for your Coach Step Model 168367. Instead, I recommend repairing the steps you have now as this will be much more cost effective and won't require any drilling. For…

view full answer...

Answer 5

The Voyager RV Backup Camera Monitor #VOM719WP has a quad screen display that allows you to observe 4 camera angles simultaneously around your RV or camper. You will have to splice a few wires but since they are all labeled its a super easy…

view full answer...

Answer 6

The Voyager WiSight 2.0 Wireless RV Backup Camera System part #ASA57YR is what I recommend for a quad view capable monitor. It has a very large 7" monitor so you can get a pretty clear view of each camera. The monitor is also both full color and…

view full answer...

Answer 7

The original steps all came with the open switch originally so I would assume that it's the original configuration and that nothing has been previously replaced. If you just want to swap out the magnets, the opposite magnets that are normally…

view full answer...

Answer 8

I reached out to my contact at TST and all of their TPMS systems like the TST TPMS for RVs - Color Display #TST-507-FT-4-C use sensors that are accurate to within +/- 3 PSI. This is a very minor variance so it is not something I would worry too much…

view full answer...

Answer 9

Yes, the Brass Tire Sensors for TST TPMS #TST-507-RV-S2 are the correct tire sensors to work with your current TST display with 2119 markings to add 2 more tire sensors.

view full answer...

Answer 10

The Brass Tire Sensors for TST TPMS - Qty 2 #TST-507-RV-S2 and the Signal Booster for TST TPMS #TST-507-R will work well with your current monitor. Many people have done this and the monitor works well with the caps as well as the flow through…

view full answer...

Answer 11

Yes the older sensors you have are compatible with the newer TST displays like the color monitor part #TST-507-D-C.

view full answer...

Answer 12

You can actually connect the Rear View Safety #RVS-811 directly to the Jensen Touch Screen RV Stereo JRV9000R, so you likely don't need the Voyager #31100041 cable- but you can still use it. You can use the same installation method on any stereo…

view full answer...