Do You Have A Replacement Step For My 2013 Tiffin Allegro Bus 43QGP Bus

Question

Question:

Hello, I have a 2013 Tiffin Allegro Bus 43QGP on a Powerglide chassis. I am looking for the part number for the outside power door steps. They are a 2 level. Any replacements available? Thanks

asked by: Scott D

0

Expert Reply:

Your outside power door steps are the Lippert brand. That part number is 5041647. I was able to find a replacement step on our website. The Replacement Steps, Motor, and Control for Kwikee RV Electric Steps - 27 Series - 29" Wide, part # LC375632. These steps are 29" in width.

I have included a product description link and a video review link below.

expert reply by: Mark Smith

0

Answer 1

I took a look at the TripleVision system on your 2009 Tiffin Allegro Bus MH, and the Rear View Safety Backup Monitor #RVS-6137Q that you mentioned, and it will actually not work with your current system, unfortunately. This monitor is only designed…

view full answer...

Answer 2

A Furrion camera will only work with a Furrion monitor. Unfortunately, there are no adapters available that will allow you to use it with your existing Triplevision monitor. Since you're looking at a side camera it makes me think you have the…

view full answer...

Answer 3

I do have an option for you but we currently do not carry the correct replacement for your Coach Step Model 168367. Instead, I recommend repairing the steps you have now as this will be much more cost effective and won't require any drilling. For…

view full answer...

Answer 4

I reached out to Lippert about the Lippert Electric Steps 5041647 on your Tiffin Motorhome and was able to confirm that the correct replacement gear for this is the Replacement Winnebago 5:1 Gearbox With High Torque Motor for RV Steps part #LC22UD…

view full answer...

Answer 5

The Voyager RV Backup Camera Monitor #VOM719WP has a quad screen display that allows you to observe 4 camera angles simultaneously around your RV or camper. You will have to splice a few wires but since they are all labeled its a super easy…

view full answer...

Answer 6

The Voyager WiSight 2.0 Wireless RV Backup Camera System part #ASA57YR is what I recommend for a quad view capable monitor. It has a very large 7" monitor so you can get a pretty clear view of each camera. The monitor is also both full color and…

view full answer...

Answer 7

The original steps all came with the open switch originally so I would assume that it's the original configuration and that nothing has been previously replaced. If you just want to swap out the magnets, the opposite magnets that are normally…

view full answer...

Answer 8

I'm sorry to hear about your steps and I did check with the manufacturer, Lippert, and the Coachsteps like your 168367 are no longer in production, so the frames by themselves are not available. So you would need a new step assembly, and I was…

view full answer...

Answer 9

Manufacturers do not list the steps they use on their RV's so you'll have to measure the entry height (ground to the mounting bracket for the steps) and mounting bracket width to know what steps are the correct fit for your 2008 Tiffin…

view full answer...

Answer 10

The purple wire from the Lippert Components Kwikee Revolution Step Control Module #LC363980 is actually an optional wire that can be connected to a porch light so the light goes on whenever the steps are extended. The wire does not need to be…

view full answer...

Answer 11

Since you have a Kwikee Series 25 step the motor replacement you need is the Lippert Components Kwikee Step Motor for 25 Series #LC369506. Just the gear is not available by itself.

view full answer...

Answer 12

I spoke to my contact at Lippert Components (LCI) and they informed me that the Lippert Components Kwikee Revolution Step Control Module part #LC363980 is the correct replacement model for your Lippert Components Kwikee Revolution Steps pn…

view full answer...