Is Spacer Block Needed When Installing Draw-Tite Trailer Hitch # 75784 on 2014 Acura RDX

Question

Question:

There are spacer blocks that the instructions say to use with this bolt, but your video does not mention them.

asked by: Stewart M

0

Expert Reply:

The Draw-Tite Max-Frame Trailer Hitch Receiver # 75784 referenced in your question is confirmed to fit your 2014 Acura RDX. For your 2014 model, the included spacer block is indeed needed. It will be taped into location on the top of the hitch at the rear most hole. I have attached an image to clarify this.

This Class III hitch will provide you with a 2 inch receiver opening and has a 4,000 pound towing weight capacity.

expert reply by: Chris R

0

click to enlarge

Answer 1

Officially, the rear jack point on the 2016 Acura RDX is a few inches forward of the rear tire. There is a tab on the vehicle that fits a notch in the jack that comes with the vehicle. But what I would do is go to a local auto parts store and get…

view full answer...

Answer 2

The Draw-Tite Class III Max Frame Receiver Hitch #75784 referenced in your question is confirmed to fit your 2017 Acura RDX. There is actually no fascia trimming or modification required for installation. On some models, it may be necessary to pull…

view full answer...

Answer 3

The Curt Trailer Hitch Receiver #C12002 for your 2007 Suzuki Grand Vitara uses weld nuts on the inside of the frame rails to attach the bolts and mount this hitch. If there are currently bolts in that location, you will need to remove them and there…

view full answer...

Answer 4

It sounds like you are referring to the square hole spacers that are included with trailer hitches like the Draw-Tite Class III #75740 for your 2003 Ford F-150. If this is not what you mean please let me know. The included spacers are required when…

view full answer...

Answer 5

The bolts included with the Curt Trailer Hitch Receiver #C13240 referenced in your question are M10-1.25 x 30 inch hex bolts. If you are just needing the replacement hardware for the trailer hitch, you will use part #RHK. Once on the product page,…

view full answer...

Answer 6

For your I recommend the Curt Class 3 Hitch #C13089. This has the 2" receiver that you are looking for. The hitch is rated for carrying up to 500 lbs of tongue weight, so more than enough for your 150 lb mobility scooter and whatever carrier you…

view full answer...

Answer 7

Going with a longer ball mount for your situation would be a great solution. The only real downside is that you might be more likely to bang your shin against the ball mount since it will be sticking out further, but the increased length does not…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Is Spacer Block Needed When Installing Draw-Tite Trailer Hitch # 75784 on 2014 Acura RDX

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching