Will 600 lb Spring Bars Work With 1,200 lb Equal-i-zer System?

Question

Question:

I have the 12000 equalizer system. Will the 6000 lb spring bars work with this system?

asked by: Kevin M

1

Helpful Expert Reply:

In order to use the 600 lb TW Replacement Spring Bars for Equal-i-zer Weight Distribution Systems # EQ90-01-0699 on your Equal-i-zer Weight Distribution System # EQ37120ET you also need to replace the head unit because the spring bars have slightly different dimensions and the 600 lb TW bars won't fit hte 1,200 lb TW system.

So to use 600 lb bars # EQ90-01-0699 you need the Replacement Head for Equal-i-zer Weight Distribution Systems # EQ90-02-0600.

expert reply by: Kyle S

1

Answer 1

In order to down-size to the 600 lb Equal-i-zer system you need the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37061ET which comes with the smaller bars and the appropriate matching head size. You can still use the same shank, but…

view full answer...

Answer 2

Hi there Ryan; thanks for the question and the easiest weight distribution hitch to connect and disconnect after initial set up is the B&W Continuum, with the right one for your 2-1/2" hitch being the following: - B&W Continuum Weight…

view full answer...

Answer 3

I am not sure what you mean by too much spring action. If you are wanting to downgrade the system by using lower rated spring bars, you would do so because the current bars are NOT providing enough spring. In any event, my Equal-i-zer representative…

view full answer...

Answer 4

The Furrion Chill HE RV Air Conditioner System #FR52PR can pull approximately 3,500 watts for a brief second during start up, which would be right at 29.67 amps.

view full answer...

Answer 5

The Replacement Socket for Equal-i-zer 1,000 Lb Weight Distribution Systems part #EQ90-03-1000 is larger than the Replacement Socket for Equal-i-zer 600 Lb Weight Distribution Systems part #EQ90-03-0600 therefore, it cannot be used with the…

view full answer...

Answer 6

You would not be able to simply replace the spring bars on your Equal-i-zer #EQ37060ET weight distribution hitch. Instead you would need to get both the 1,000 lb tongue weight spring bars #EQ90-01-1099 as well as the 1,000 lb head unit…

view full answer...

Answer 7

From your photo, it looks like you have a Dexter axle, part number 51955. From my research, it appears this is likely a 3,500-lb axle. However, the weight capacity should be listed on the axle itself, so it would be best to confirm this before…

view full answer...

Answer 8

It is possible for some spring bars to be interchanged based on their size, but that won't increase a weight distribution system's capacity without adding the appropriate head unit. The replacement spring bars that are rated for 1,200 lbs TW…

view full answer...

Answer 9

Since the The Furrion Chill HE RV Air Conditioner System #FR52PR can pull approximately 3,500 watts for a brief second during start up, which would be right at 29.67 amps, the smallest sized generator you'd really need would be the etrailer…

view full answer...