Recommended Suspension Enhancement for 2016 Ford F-150 Crew Cab 4x4

Question

Question:

I see they are rated for 7000 pounds. I am pulling a 9k trailer with a tongue weight of 1100. Will this product work or will it cause damage? I have a 2016 F-150 Crewcab 4x4

asked by: Tim

0

Expert Reply:

The Timbren Suspension Enhancement System # TFRTT1504E is a confirmed fit for your truck. With a 1,100 lb tongue weight trailer, this system will help to keep the rear end from squat and your headlights from being too high to see the road as intended. These will act as a shock absorber as well as helping to stabilize your truck when under load. These spring are made for severe service vehicles like tow trucks so I don't recommend then for your truck as they can actually cause your truck to have a rough ride when not under load because they are designed to be so heavy duty. They won't cause damage, they just won't be the ideal ride.

My recommendation is the SumoSprings Solo Custom Helper Springs - Rear Axle # SSR-117-47 which are rated for 1,500 lbs and will be a smooth ride whether under load or not. They are still maintenance free and install in the same location. The progressive load control is much better suited for your application. I've attached a video to assist.

If you want a stronger support then I recommend the Timbren # TFR1504E rated for 6,000 lb capacity. These will be a stiffer spring but will provide more support under load.

expert reply by: Jason S

0

Answer 1

The Timbren Suspension Enhancement System item #TFRTT1504E has a total height of 6.75” with a 1” spacer. This system is confirmed to fit your 2015 Ford F-150. I have linked an installation video below.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 9

Hey Michael, thanks for reaching out! The Timbren Active Off-Road Bumpstops #T28GR you installed on your 2018 Ford F-150 unfortunately have that reputation among users (although Timbren claims their systems provide a smooth ride). Because of this…

view full answer...

Answer 10

Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is…

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from…

view full answer...

Answer 12

The correct Roadactive kit that fits your 2023 Ford F-150 is the part #RAS3611-YHD. I really like the RAS kits as they basically don't have any downsides. You get the adjustable support, an easy install, no maintenance, and actually…

view full answer...