Which Brake Switch Wire is Used When Installing Brake Controller on 2008 Dodge Ram 1500
Question:
On a 2008 dodge 1500 I am installing brake controller what wire do I hook to on brake switch color
asked by: Carl
Expert Reply:
A brake controller has four wires exiting the rear of the controller, they attach as follows: the red wire attaches to the brake stoplight switch located at the top of the brake pedal. The color of the correct wire on the brake switch is usually a white wire with a tan stripe, but it could vary so it is best to find the correct wire you will need by testing the wires for function. The stoplight switch can have several wires exiting it, you will need a circuit tester like Quickee Tester, part # PTW2993, to probe each wire until you locate the wire that shows voltage only when the brake pedal is pressed. Once located, tap the red wire from the controller into this circuit.
The blue wire attaches to the wire ran up from the 7-Way at the rear of the vehicle, the black wire runs to the positive battery terminal via either the 20- or 30-amp circuit breaker included in the kit (consult brake controller instructions to find which is appropriate) and the white wire connects to the negative battery terminal.
I am including a link to a FAQ page on brake controllers and a link to a FAQ page on Dodge Ram brake controller installation.
Products Referenced in This Question
Product Page this Question was Asked From
Replacement Brake Control Plug-In Harness for Tekonsha and Draw-Tite Brake Controller 12" Long
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Universal
- Draw-Tite
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Electric Brake Controller Installation on Dodge Ram Trucks to 2012
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Tekonsha Prodigy P3 Trailer Brake Controller Installation - 2006 Dodge Ram Pickup
- Q&A: Adding a 7-Way Trailer Connector to a 2005 Dodge Ram 1500 with Factory 4-Way
- Q&A: Hard Wiring Brake Controller For 2008 Dodge Ram 1500
- Q&A: 7-Way RV Trailer Connector Wiring Diagram
- Q&A: Installing a Brake Controller on a 2004 Dodge Ram Without a Factory Tow Package
- Shop: Brake Controller
- Shop: Trailer Hitch
- Video: Choosing the Right Brake Controller
- Search Results: 44649
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Trailer Wiring
- Video: Choosing the Right Trailer Wiring
- Search Results: 68149
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Replacement for Demco Master Cylinder 05680-C for Drum Brakes
- Search Results: 25580
- Shop: Suspension Enhancement
- Article: Brake Controller Installation: Starting from Scratch
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Video: EcoHitch Hidden Front Mount Trailer Hitch Installation - 2021 Ford F-250 Super Duty
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional
- Shop: Fifth Wheel Hitch
- Video: Lippert Center Point Trailair Air-Ride Suspension Upgrade Review
- Search Results: brake controller
- Search Results: trailer brake controller