Replacement Air Conditioner Shroud For Coleman Mach 3

Question

Question:

I need a replacement shroud for my coleman trs mach3. It is ether 6757 or 6759, do have it?

asked by: Lloyd L

0

Expert Reply:

The MaxxAir TuffMaxx Replacement Shroud - White # MA00-325001 is a confirmed fit for your Coleman Mach 3 TRS as well as other models like the P.S. (power saving model) . It will be a perfect fit and includes the stainless steel mounting hardware as well as the instruction for installation.

expert reply by: Jason S

0

click to enlarge

Answer 1

I looked up your Coleman 6759D Series TSR Rotary AC and found that the correct shroud for it is the part #MA8335A5261.

view full answer...

Answer 2

We do have the correct replacement shroud for a Coleman Mach 3 Air Conditioner, the MaxxAir TuffMaxx Replacement RV Air Conditioner Cover for Coleman-Mach RV Air Conditioners part #MA00-325001. I checked the mounting hole spacing on this shroud and…

view full answer...

Answer 3

I pulled up a Coleman RV AC unit 7330-714 and it is a Mach style unit like what the part #MA00-325001 you referenced is designed to fit so this would be the correct replacement.

view full answer...

Answer 4

In order to add a 7-Way trailer connector to your 1995 Ford F-150 that has a 4-Way, you would need #37185. I have linked a video to the right that will help with the installation. Since your truck has a 4-Way already there will be a connector under…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 12

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Replacement Air Conditioner Shroud For Coleman Mach 3

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching