Curt Powered Converter Lead Instruction Sheet CME-PCL-INS

Question

Question:

Is there a way you could send me the CME-PCL-INS sheet referenced in step 9 of the instructions? That would be most helpful.

asked by: Ben S

0

Expert Reply:

The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56383 does refer to that sheet. I've attached the link but also a photo of the sheet to ensure you get what you need in a format that works for you.

expert reply by: Jason S

0

click to enlarge

Answer 1

Starting with the trailer hitch for your 2018 Volkswagen Atlas, I recommend the Draw-Tite Class III Max Frame Receiver Hitch #76176. This is a great Class III hitch that will provide a 2 inch receiver opening and a 6,000 pound towing capacity,…

view full answer...

Answer 2

I attached a picture that shows the CME-PCL-INS as well as a help article that covers this portion of trailer wiring installs as well. Overall it's not a difficult process but it does take some time routing it up to the front of the…

view full answer...

Answer 3

The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56381 requires power directly from the battery. You will need to run that power wire away from hot or moving parts up to your vehicle battery. To do so, there are 3…

view full answer...

Answer 4

We do not offer the Cm-S19 spacer as a separate item. It is available as part of the replacement hardware kit for installation of your Curt Trailer Hitch, part #C13264. To order the replacement hardware kit you can type #RHK in the search box on…

view full answer...

Answer 5

While we don't have just the CM-SP12 spacers for the Curt Trailer Hitch Receiver #C13362, you can either get a complete replacement hardware kit with part #RHK or you can just get 2 of the Trailer Hitch Spacer Block - 3" Long x…

view full answer...

Answer 6

I reached out to my contact at Curt and for your 2017 Hyundai Ioniq using wiring harness #C56381, you will connect that 12V power wire for the harness to the lithium ion starter battery under the back seat on driver's side. It is a little…

view full answer...

Answer 7

The black wire of the 7-way that you are asking about is for the 12 volt accessory circuit of the trailer connector. This circuit is not required for installing a brake controller so if you have no need for an aux power circuit then you would not…

view full answer...

Answer 8

Yes, all of the lights in the #TL16RK Waterproof, Over 80 inch Trailer Light Kit will need to be grounded. The white wires on the tail lights are attached to the trailer frame, and the chrome bases provide the ground to the trailer frame through the…

view full answer...

Answer 9

Most trailer wiring problems are the result of a bad ground. What I would do is start with the connectors. Maker sure the connectors on both the trailer side and vehicle side are free of dirt and corrosion and that they are properly grounded. Next, I…

view full answer...

Answer 10

The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56284 for 2016-2018 Honda HR-V models only has a review video at this time and not an installation video. This custom-fit T-connector plugs into your vehicle's…

view full answer...

Answer 11

We used to carry the Curt hitch C13131 that you referenced so we can get you the replacement hardware kit for it with part #RHK. What you'll need to do is select Curt from the drop down menu of the product page and then enter the part number of…

view full answer...

Answer 12

I don't recommend connecting the power wire of the #C56320 to anywhere but the vehicle battery. Using the 12 volt outlet in the cargo area of your 2018 Ford Escape may not work properly. The converter needs to receive power from an isolated 12…

view full answer...

Curt Powered Converter Lead Instruction Sheet CME-PCL-INS

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching