Adapter for Allowing Ford Integrated Brake Controller to Recognize Electric Over Hydraulic Actuator
Question:
Traded my 2009 F-450 pulling RV with actuator HBA-16 1600 PHI Serial #511886. Is there something different that causes Fords 2018 F-350 to display error message on dash that trailer disconnected. Carlisle Manual is 440-1023. Brakes on the RV appear excellent, with existing Carlisle Actuator installed on 2009 DRV Elite Suites RSSB3 Any help is appreciated....
asked by: Joe M
Expert Reply:
Most newer truck manufacturers have made their integrated brake controllers compatible with electric over hydraulic actuators like the Hydrastar # HBA16 that you mentioned but we have found that it's not always consistent that they will work without issue. Best solution we have for you would be to use the adapter part # HBA-CAM which is designed for integrated Ford brake controllers like you have. Once installed your truck will recognize that a trailer is connected.
Products Referenced in This Question
Hydrastar Electric Over Hydraulic Actuator Adapter Module for Ford and Chevy Brake Controllers
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Adapters
- Hydrastar
more information >
Product Page this Question was Asked From
Hydrastar Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- 1600 psi
- Disc Brakes
- Hydrastar
more information >
Continue Researching
- Q&A: Is the Hydrastar Electric Over Hydraulic Acatuator Adapter Module Needed for a 2024 Ford
- Shop: Hydrastar Electric Over Hydraulic Actuator Adapter Module for Ford and Chevy Brake Controllers
- Video: Hydrastar Brake Actuator HBA-CAM Review
- Q&A: Is Adapter Module Needed to Use EOH Brake System with 2011 Ram 2500 Factory Brake Controller
- Q&A: 5th Wheel Hitch With Maximum Height for Most Trailer-to-Truck Bed Rail Clearance
- Q&A: Is a 2010 Ford F-450 Integrated Brake Controller Compatible a Generation 5 Hydrastar HBA-10
- Q&A: How to Increase the Clearance Between the Truck Bed Rails and the Bottom of a 5th Wheel Trailer
- Q&A: Brake Controller Compatibility with EOH Trailer Brake Actuators
- Shop: Replacement Gauge for Valterra Adjustable Water Regulator - 0-160 PSI
- Search Results: 7 pin connector ford
- Shop: 7-Way Round RV Style Trailer Connector - Trailer Side
- Search Results: spring hanger
- Search Results: spring mount
- Video: Review of MORryde Trailer Leaf Spring Suspension - Spring Mounting Upgrade Hardware - MR38ZR
- Shop: MORryde Suspension Upgrade Kit for Triple Axle Trailers - 3-1/8" Long Shackle Straps
- Shop: MORryde Suspension Upgrade Kit for Triple Axle Trailers w Correct Track - 2-1/4" Shackle Straps
- Shop: Hydrastar Disc Brake Kit w/ Actuator for Triple Axle Trailers - 13" Rotor - 8 on 6-1/2 - 7K
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Search Results: axle hanger
- Search Results: triple axle hanger kit
- Q&A: Trailer Suspension Hanger Kit with the Most Lift for Tire Clearance Under the Trailer Bed
- Shop: Trailer Hitch
- Video: Titan Trailer Brakes T2385200 Review
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Search Results: 68149
- Article: RV Cell Boosters, How Do They Work?
- Video: HydraStar Electric Over Hydraulic Actuator Kit Review
- Article: What is Overlanding? How to Start your Overlanding Journey
Keelan G.
6/22/2020
I just purchased a car trailer which has the HBA-16 Hydrastar. My vehicle is a 2018 Ram 2500 with factory brake controller. WIl my factory setup work, i have read things that say it will and then things that say i need the HBA-CAM but that shows it is for Ford/Chevy's please advise as i do not want o spend money on things that are not needed. Thanks