How to Order Replacement Hardware for Curt Trailer

Question

Question:

Part # for 13542 curt hitch on ford freestyle bolt kit hardware replacement...thnk u

asked by: Jeremy S

0

Expert Reply:

We offer the part # RHK which will allow you to order a replacement hardware/bolt kit for any hitch we offer. So what you'd need to do is enter the part number 13542 on the product page and then select Curt from the drop down menu and we'll ship you out what you'll need.

expert reply by: Jameson C

0

Answer 1

The Trailer Hitch Spacer Block #RP3022 that you referenced is sold individually.

view full answer...

Answer 2

We do carry one of the parts you mentioned, the Replacement Hex Whiz Lock Nut for Blue Ox Hitch Receiver Immobilizer #BX202-0071.

view full answer...

Answer 3

We have just what you need. If you type RHK in the search box on our website it will take you to the replacement hardware kit product page. You will then simply type the number of the hitch you need hardware for in the box that is labeled Hitch…

view full answer...

Answer 4

The Curt trailer hitch #13542 for the 2006 Ford Freestyle is made in the US. I have included a link to the installation instructions for you. If you plan on doing some towing, I recommend the etrailer ball mount kit #EBMK4. It comes with a ball…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 8

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 9

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

How to Order Replacement Hardware for Curt Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching