How Tall are Timbren Suspension Enhancement Springs for a 2008 Toyota Tundra

Question

Question:

How tall are the timbren that would fit the truck so I cam compare it to what is there now?

asked by: Steve

1

Helpful Expert Reply:

It sounds like you're asking about the # TTORTUN4 Timbrens that do fit your 2008 Toyota Tundra. They measure 3-3/4 inches tall.

I've linked a video of them being installed on a 2007 Tacoma so you can see the process.

expert reply by: Charles S

1

click to enlarge

Answer 1

I went out and pulled both the Timbren kit part #TTORTUN4 and #TTORTUN4L from our warehouse to measure them for you and found that they both sit exactly 3-3/4 inches tall.

view full answer...

Answer 2

I would normally recommend using an air bag suspension enhancement for your truck but since you said you are planning on towing a fifth wheel trailer the air suspension kits we offer are not compatible with a fifth wheel hitch and I recommend going…

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

Hey Tarek, for your 2023 Ford Raptor I recommend checking out the Timbren Suspension Enhancement System #T75MR. This suspension enhancement system has a load leveling capacity of 3,000 lbs, will increase stability while reducing sag, and will install…

view full answer...

Answer 5

The Lippert Equa-Flex #LC145546 is the closest cushioned equalizer from Lippert to fitting your Grand Design 2800BH. This particular kit is rated for 5K-8K axles. The MORryde CRE3000 #MR27ZR is going to be the best option for your camper. While this…

view full answer...

Answer 6

I was able to find some information on your Cargomate TXLEEH58SA trailer. From what I found, it appears your tire size is 15 and your load range is B based on the factory tires. We have only have a load range C option and it is the Loadstar…

view full answer...

Answer 7

I went out to the warehouse and actually pulled 2 possible fits for your 2010 Toyota Tacoma. First, for Timbren springs #TTORTUN4, the overall height from the bottom of the bracket to the top of the spring is approximately 5 inches. The other kit I…

view full answer...

Answer 8

I reached out to Timbren, who told me the the actual jounce springs are both the same height at 3-3/4 inches, but the bracket height is different. So there aren't shorter springs, and the correct fit for your 2019 Toyota Tacoma 4WD is going to…

view full answer...