Can Trailer Hub that Fit 8 inch Diameter Wheel also Fit 12 inch Diameter Wheel
Question:
I am getting ready to transform my 4foot x 8foot utility trailer into a small light weight camping trailer less than 1000 pounds loaded. Currently it has 8inch 5 on 4.5 wheels, hub etc. I made a template from the original 8inch 5 on 4.5 rim and took it over to a local tire store that sells trailer rims and tires. It was an exact fit on the larger 12inch rim. My question is, can I increase the rim size on my trailer or do I have to replace the hubs as well? Note: I have removed the fenders and will not install new fenders until the build is completed so I do not have any suspenion travel or rub issues. Thank you,
asked by: Kurtis D
Expert Reply:
We have trailer hubs like the part # AKIHUB-545-2-1K that have a 5 on 4-1/2 inch bolt pattern that fit rim diameters of between 8 and 12 inches. This is a fairly common rim diameter range too so you should be totally fine to go up to a 12 inch wheel and tire combo like the Kenda Wheel and Tire part # AM31202 which has an ST145/R12 Tire Installed on a 12 inch wheel with a 5 on 4-1/2 inch bolt pattern.
Products Referenced in This Question
Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" Galvanized Spoke Wheel - 5 on 4-1/2 - LR D
- Trailer Tires and Wheels
- Tire with Wheel
- Radial Tire
- Load Range D
- 145/80-12
- 12 Inch
- M - 81 mph
- 5 on 4-1/2 Inch
- Steel Wheels - Galvanized
- Boat Trailer Wheels
- Kenda
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Trailer Modifications and 8 inch to 12 or 13 inch Tire and Wheel Upgrade Recommendations
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Karrier ST175/80R13 Radial Trailer Tire with 13" White Wheel - 5 on 4-1/2 - Load Range C
- Shop: Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Shop: Karrier ST175/80R13 Radial Trailer Tire w/ 13" White Modular Wheel - 5 on 4-1/2 - Load Range C
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: DeeMaxx Trailer Idler Hub for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Search Results: trailer wheel studs
- Search Results: hubs
- Search Results: hub spacer
- Q&A: Wrench Needed To Remove Trailer Wheel Lug Nuts and Most Common Lug Nut Sizes on Trailer Wheels
- Search Results: 44649
- Q&A: Hub And Drum Replacement for 90865 Rockwell Hub and Drum
- Article: Trailer Wiring Diagrams
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Trailer Hitch
- Article: Trailer Tire Sizing
- Search Results: 68149
- Shop: Trailer Wiring
- Q&A: Seal With Dimensions to Replace 171255UC
- Q&A: How to Measure Hub Face of Mobile Home Hub and Drum
- Search Results: 25580
- Shop: Gooseneck Hitch
- Article: Most Popular Wheel Bearings
- Video: Timbren Axle-Less Trailer Suspension System Test Course
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Search Results: equalizer
- Shop: Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)