Replacement Cover for TruXedo Lo Pro QT on a 2006 Chevrolet Silverado with 6-1/2 Foot Bed

Question

Question:

Hi, I have a 2006 Chevy Silverado with the 6 1/2’ bed. The cover I have has a stamp on it, see pic. Also provided photo of the part number on the mount part.

asked by: Jason

1

Helpful Expert Reply:

I contacted TruXedo with the number on your cover to verify that you have the Lo Pro QT, part # TX581101, on your 2006 Chvevrolet Silverado.

The replacement cover you need is part # TX1117651.

expert reply by: Charles S

1

click to enlarge

Answer 1

The best method to identify the tonneau cover on your 2008 GMC Sierra will be to look for the date code and or serial number. The serial number is located on the driver's side of the front header on the TruXport frame. The date code is printed on…

view full answer...

Answer 2

The correct replacement Velcro for a Truxedo Lo Pro QT tonneau is the part #TX1115174. This strip is 1-5/16 inches wide and could be trimmed to length to fit your truck.

view full answer...

Answer 3

I do have a tonneau cover that fits your 2003 Sierra 2500 6-1/2 ft bed but the TruXedo Lo Pro Soft Roll-up Tonneau Cover #TX548101 fits Dodge trucks. The TruXedo Lo Pro Soft Roll-up tonneau Cover that you need for the GMC Sierra is #TX581101. If you…

view full answer...

Answer 4

If the TruXedo tonneau cover you have on your 2003 Chevrolet 2500HD is the Lo Pro QT then yours is part #TX581101. In which case the replacement tarp you need is part #TX1117651. If you have a different TruXedo let me know which it is and I'll…

view full answer...

Answer 5

If you check out the attached picture you can see where you'll find the serial number and date code on your cover.

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Hey Dustin, thanks for reaching out! I will recommend SumoSprings over Timbrens all day everyday because they are much more forgiving when the vehicle is unloaded. We've actually joked around here about how the Timbren kits will either give you…

view full answer...