Replacement Tarp for TruXedo Tonneau Cover on 2003 Chevy Silverado 2500HD Short Bed

Question

Question:

I have 2003 Chev 2500HD short box. All I need is the replacement cover

asked by: David M

0

Expert Reply:

If the TruXedo tonneau cover you have on your 2003 Chevrolet 2500HD is the Lo Pro QT then yours is part # TX581101. In which case the replacement tarp you need is part # TX1117651.

If you have a different TruXedo let me know which it is and I'll find the correct tarp. If you aren't sure send me a couple of pictures and I'll get in touch with my contact at TruXedo if need be.

expert reply by: Charles S

0

Answer 1

The correct replacement Velcro for a Truxedo Lo Pro QT tonneau is the part #TX1115174. This strip is 1-5/16 inches wide and could be trimmed to length to fit your truck.

view full answer...

Answer 2

I contacted TruXedo with the number on your cover to verify that you have the Lo Pro QT, part #TX581101, on your 2006 Chvevrolet Silverado. The replacement cover you need is part #TX1117651.

view full answer...

Answer 3

I do have a tonneau cover that fits your 2003 Sierra 2500 6-1/2 ft bed but the TruXedo Lo Pro Soft Roll-up Tonneau Cover #TX548101 fits Dodge trucks. The TruXedo Lo Pro Soft Roll-up tonneau Cover that you need for the GMC Sierra is #TX581101. If you…

view full answer...

Answer 4

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 5

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 6

A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will need…

view full answer...

Answer 7

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

So I have your hub narrowed down to a few different possibilities but we need to know what your bolt pattern is to know for sure. We have the part #84556UC3 for if your bolt pattern is 5 on 5 inch. We have the part #845476UC3 for if your bolt pattern…

view full answer...

Answer 10

The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…

view full answer...

Answer 11

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 12

Since the issue appears to be on the vehicle side for your 2017 Toyota Tacoma, I recommend first checking the connector itself. Look to see if there is any dirt or corrosion built up inside the connector that may preventing a solid connection with…

view full answer...

Replacement Tarp for TruXedo Tonneau Cover on 2003 Chevy Silverado 2500HD Short Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching