Aluminum Hi-Spec Series 06 Trailer Wheel Compatibility with Metal Valve Stem # AM20906

Question

Question:

Will the Americana metal value stem fit on the Aluminum Hi-Spec Series 06 Trailer Wheel - 16inch x 7inch Rim - 6 on 5-1/2 - Black?

asked by: Leonard D

0

Expert Reply:

The Aluminum Hi-Spec Series 06 Trailer Wheel has a 0.453 inch hole which is standard with an outer diameter of 0.67 inch. Unfortunately the Americana Metal, Bolt-In Valve Stem # AM20906 has a washer that is .74 inches wide, so it will not work with this wheel.

You can use the rubber valve stem # AM20904 which is rated for up to 80 psi and looks really nice on the black powder coated wheel.

expert reply by: Jason S

0

Answer 1

I have a solution for you but the Americana Metal, Bolt-In Valve Stem item #AM20906 has a washer that is 74" wide. Your Hispec Series 07 766865HD wheel has a 0.453" hole with an outer diameter of 0.67". This will not fit. You are going…

view full answer...

Answer 2

Usually valve stems that are rated for 110 psi will be metal such as #AM20906. The valve stems usually match the tire capacity. The safe bet would be to use new valve stems so you can be sure. It is not a big expense and it will give you piece of…

view full answer...

Answer 3

Yes, the Americana Metal Bolt-In Valve Stem #AM20906 is suitable for use with the HWT Hi-Spec Series 03 Mod Trailer Wheel #AM22657. The stem comes with 2 sizes of rubber grommet (only one will be used) to allow installation in wheels with a valve…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 6

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 7

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 8

Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…

view full answer...

Answer 9

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 10

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 11

Hey Jason, for a set of metal valve stems that fit your 2023 Grand Design 2910BH we have the part #AM20906 that you referenced which will fit and work great with your TPMS cap sensors.

view full answer...

Answer 12

Hey Vaughn, thanks for reaching out! The max psi rating of the Americana Aluminum Mod Trailer Wheel #AM22646 will be the equivalent to the rating of the valve stem that you install on it. The Americana Metal, Bolt-In Valve Stem #AM20906 can handle up…

view full answer...