Best Trailer Wiring Harness for a 2017 Toyota Tacoma

Question

Question:

do you have a wiring harness for a Toyota Tacoma 2017

asked by: Kevin

0

Expert Reply:

Yes, we have several wiring harnesses for a 2017 Toyota Tacoma. If you are looking for a 4-way trailer wiring harness to tow a trailer, then I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # C56349. If you are looking for a 7-way trailer wiring harness to tow a trailer with brakes, then I recommend the Tekonsha OEM Replacement Vehicle Wiring Harness with Brake Controller Adapter part # 22117.

I have also attached an install video of the 4-way harness on a similar 2017 Toyota Tacoma for you as well.

expert reply by: Conner L

0

Answer 1

If there is constant power on the trailer connector at any of the circuits while the vehicle is off, then this indicates the converter has gone bad and the entire wiring harness will need to be replaced. The best option we have for a 2019 Toyota…

view full answer...

Answer 2

The Curt T-Connector Vehicle Wiring Harness #C56349 will continue to send power to the vehicle taillights on your 2019 Toyota Tacoma if the power to the convertor module is lost. No power will go to the trailer taillights.

view full answer...

Answer 3

We do offer the Curt part #C56349 which is a plug-in T-connector, 4-pole wiring harness for your 2017 Toyota Tacoma. It intended for trucks without the factory tow package. Please note that the term 'tow package' does not always mean…

view full answer...

Answer 4

Yes, we do have a hitch for your 2023 Toyota Tacoma. It is the Curt Trailer Hitch item #C13264. This hitch is custom fit and bolts to your Tacoma with included hardware. This is a class III hitch with a 2" receiver. It has a 7,000 lbs towing…

view full answer...

Answer 5

For your 2020 Toyota Tacoma SR5 the Draw Tite hitch part #75238 would be the best option as it has the best towing capacities and installs easily. Then for trailer wiring the Curt T-Connector part #C56349 is the way to go.

view full answer...

Answer 6

I recommend the Curt T-Conenctor Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #C56349 for the 2020 Toyota Tacoma which plugs in behind the tail lights so there is no need for a tow package on the vehicle. The black wire does need to…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...