Recommended Options for Height Adjustment on 1,800 lb Axle
Question:
Trailer and cargo gross less that 1500 pounds. The frame rails on the trailer are 48 outside to outside. I was able to get a rough measurement center to center on the leafs, and I think a 46-1/2 should fit. But I need an overslung axle. The one that came off was a channel with two short spindles sticking out the ends rather than an axle running the entire length. Also I need roughly 56 inches from hub face to hub face. Can I install this axle in the overslung configuration?
asked by: Karl
Expert Reply:
You can mount the CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 Bolt Pattern - 57-1/2" Long - 1,800 lbs # CE33201GA-HUB in an overslung axle position. You will simply need to use a U-bolt kit like # CE23102 but with longer U-bolts. We unfortunately do not have that hardware but you will want the bolt plates for 1-3/4 inch springs.
Products Referenced in This Question
CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc
- Trailer Leaf Spring Suspension
- U-Bolt Kits
- Boat Trailer
- Snowmobile Trailer
- 2000 lbs
- Square Axle - 1-1/2 Inch
- 3/8 Inch Diameter
- 3-3/8 Inch Long
- CE Smith
more information >
Product Page this Question was Asked From
CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 1800 lbs
- 5 on 4-1/2 Inch
- 46-1/2 Inch Long
- 57-1/2 Inch Long
- No Drop or Lift
- CE Smith
more information >
Continue Researching
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-G-2K Review
- Video: Review of CE Smith Trailer Axles - Leaf Spring Suspension - CE33201GA-HUB
- Q&A: Available Galvanized Axles For Boat Trailer
- Q&A: What Size Hub Will Work With Americana 8-Inch Steel Trailer Wheel
- Q&A: What is Smallest Tire Size that Can Fit CE Smith Trailer Axle # CE33201GA-HUB
- Q&A: Recommended Axle For Salt Water Boat Trailer
- Q&A: Replacement 2K Axle Recommendation with 46.5 Inch Spring Centers
- Q&A: What Wheels Will Fit the Trailer Axle part # CE33201GA-HUB
- Search Results: l44649
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,200 lbs
- Shop: CE Smith Single Axle Trailer Fender - Pre-Galvanized Steel - 8" Wheels - Qty 1
- Shop: CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K
- Shop: Loctite High Performance Synthetic Grease - 14.1 oz Can
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Video: CE Smith Trailer Suspension - Leaf Spring Suspension - CE23102 Review
- Video: Review of Trailer Leaf Spring Suspension - Spring Mounting Hardware - 166079
- Video: CE Smith Trailer Fenders CE26061G-2 Review
- Video: CE Smith Mounting Brackets for Trailer Fenders Installation
- Q&A: LED Lights for 1991 Ranger Boat Trailer
- Search Results: leaf spring
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: axle
- Article: Most Popular Wheel Bearings
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Trailer Wiring
- Article: Trailer Tire Sizing
- Shop: Brake Controller