Replacement 2K Axle Recommendation with 46.5 Inch Spring Centers
Question:
Looking for axle 57.50 hb with spindles already attached 2000 pounds 46 1/2 center from leaf spring to leaf spring
asked by: Thomas W
Expert Reply:
For your application we have the CE Smith Galvanized Axle Beam # CE33201GA which is also available with idler hubs that have a 5 on 4-1/2" bolt pattern as part # CE33201GA-HUB. The only spec that doesn't quite match up is the weight rating as you said 2K and this is rated for 1.8K.
If you absolutely need a 2K rating then I recommend checking out the Timbren Heavy-Duty Axle-Less Trailer Suspension - Straight Spindle # ASR2KHDS01 which installs directly to your trailer frame. I like this system because it gives you a much more effective but simpler suspension since you aren't dealing with hangers, bolts, leaf springs, and equalizers. If this is for a boat application just make sure you rinse off Timbrens so it's clean water they are left to deal with.
Attached are some review videos for you to check out.
Products Referenced in This Question
Timbren Axle-Less Trailer Suspension - Heavy Duty - No Drop - 4 Bolt Flange - 2,000 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 1800 lbs
- 5 on 4-1/2 Inch
- 46-1/2 Inch Long
- 57-1/2 Inch Long
- No Drop or Lift
- CE Smith
more information >
Product Page this Question was Asked From
CE Smith Trailer Axle Beam with Standard Spindles - Galvanized - 57-1/2" Long - 1.8K
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- No Hubs
- 1800 lbs
- Spindles Only
- 46-1/2 Inch Long
- 57-1/2 Inch Long
- No Drop or Lift
- CE Smith
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: CE Smith Trailer Axle Beam with Standard Spindles - Galvanized - 57-1/2" Long - 1.8K
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-G-2K Review
- Shop: CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K
- Shop: Mounting Brackets for Trailer Fender - 8"/12" Wheels - Galvanized Steel - Qty 2
- Shop: LubriMatic Deluxe Bearing Packer
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Shop: CE Smith Bearing Protectors w/ Covers for 1.985" Hub Bore - Chrome - 1 Pair
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Q&A: Available Galvanized Axles For Boat Trailer
- Q&A: What Size Hub Will Work With Americana 8-Inch Steel Trailer Wheel
- Q&A: Recommended Hubs for 80's Shorelandr Boat Trailer with 5 Bolt Hubs and 8" Wheel
- Q&A: What Wheels Will Fit the Trailer Axle part # CE33201GA-HUB
- Q&A: What is the Highest Capacity and Highest Speed Rated 12 Inch Wheels With Good Corrosion Resistance
- Q&A: Can a Smaller Wheel and Tire Be Used on a Trailer If the Capacity is High Enough
- Q&A: What is Smallest Tire Size that Can Fit CE Smith Trailer Axle # CE33201GA-HUB
- Video: Review of CE Smith Trailer Axles - Leaf Spring Suspension - CE33201GA-HUB
- Search Results: l44649
- Video: CE Smith Trailer Suspension - Leaf Spring Suspension - CE23102 Review
- Video: CE Smith Mounting Brackets for Trailer Fenders Installation
- Video: Review of Trailer Leaf Spring Suspension - Spring Mounting Hardware - 166079
- Video: CE Smith Trailer Fenders CE26061G-2 Review
- Shop: Roof Rack
- Search Results: haul~master
- Search Results: square trailer axles
- Search Results: harbor freight
- Search Results: harbor freight trailer