Replacement Locking Core and Key for Toolbox  

The Replacement Lock Cylinder for UWS Toolboxes with Square Paddle Handles, part #UWSLOCKCH501, you have referenced, will come with a pair of the key #CH501. If you order 6 of these locks they will all come with the #CH501 keys, so they will be keyed…

It is hard to say if this is an exact fit since we do not carry RK locks, but my research tells me that the closest match is Replacement Lock Cylinder for UWS Toolboxes w Square Paddle Handles - CH504 #UWSLOCKCH504. You will want to compare this to…

I did confirm that the replacement lock cores for UWS toolboxes like the #UWSLOCKCH508 does in fact use the rivet you referred to, but these are the only locks we've got that are confirmed to work with a UWS toolbox. We also added this photo to…

I recommend replacing the cam locks on the toolbox with some new ones especially if the keys to yours are floating around out there somewhere! We have cam lock #CAM44340 that uses a flat key (2 keys included) and it is 5/8 inches thick.

The Replacement Lock Cylinder #UWSLOCKCH501 is designed to fit UWS Toolboxes, however, we've had a few customers report that they were able to use it on their Delta toolboxes. While chances are it will work, we don't sell Delta products, so I…

It sounds like you simply need some replacement toolbox lock cylinders keyed alike. The PK numbers you gave were for basic lock cylinders for toolboxes and even though we don't carry those specific locks or keys I do have options for you. I…

Key codes for UWS toolboxes usually include the letter prefix CH. Please refer to the photo that shows where to find this on the face of the lock. This photo happens to show a lock code CH510. I tried both of the codes you gave but neither seems to…

Since the #UWSLOCKCH504 is already a replacement part, smaller parts such as the cam lock nut you mentioned are not available separately. The only solution is to purchase a new one which will include the lock cylinder and two keys as well.

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…