How is the Latch on the Rear of the UWS Toolbox Replacement Lock Core Connected to the Core

Question

Question:

Hidden view of your lock cylinders, leaves prospective buyers wondering what youre hiding. All your website CH*** lock cylinders hide, what, the fact that the square paddles arefoot not secured with a screw, instead is irremovably riveted to the back side of your such cylinders?

asked by: Steven H

0

Expert Reply:

I did confirm that the replacement lock cores for UWS toolboxes like the # UWSLOCKCH508 does in fact use the rivet you referred to, but these are the only locks we've got that are confirmed to work with a UWS toolbox. We also added this photo to the product page to show the rear of the lock core.

expert reply by: Erik B

0

rear of lock core
(click to enlarge)

Answer 1

The cam is not removable - it is riveted on - from the Replacement Lock Cylinder for UWS Toolboxes w Square Paddle Handles - CH503 #UWSLOCKCH503.

view full answer...

Answer 2

I do have a possible option for you but we do not carry replacement parts for Dewalt tool boxes. Instead, I recommend replacing the locking core with something like part #UWSLOCKCH501. You may need to reuse your existing latch in order for this…

view full answer...

Answer 3

I recommend replacing the cam locks on the toolbox with some new ones especially if the keys to yours are floating around out there somewhere! We have cam lock #CAM44340 that uses a flat key (2 keys included) and it is 5/8 inches thick.

view full answer...

Answer 4

It is hard to say if this is an exact fit since we do not carry RK locks, but my research tells me that the closest match is Replacement Lock Cylinder for UWS Toolboxes w Square Paddle Handles - CH504 #UWSLOCKCH504. You will want to compare this to…

view full answer...

Answer 5

There are several different lock and key replacements for UWS toolboxes and each one is different from the next. There is a chance you could end up with the same lock and key that you already have on the box but you would just need to order a…

view full answer...

Answer 6

It sounds like you simply need some replacement toolbox lock cylinders keyed alike. The PK numbers you gave were for basic lock cylinders for toolboxes and even though we don't carry those specific locks or keys I do have options for you. I…

view full answer...

Answer 7

Since the #UWSLOCKCH504 is already a replacement part, smaller parts such as the cam lock nut you mentioned are not available separately. The only solution is to purchase a new one which will include the lock cylinder and two keys as well.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…

view full answer...

How is the Latch on the Rear of the UWS Toolbox Replacement Lock Core Connected to the Core

Product Page this Question was Asked From

Continue Researching