Recommended Trailer Connector With 4 and 7-Way Connection For 2017 Chevrolet Traverse

Question

Question:

Does the harness 118271 come with a 4 way and 7 way plug or just 7 way plug at hitch end ? I have a 2017 Chevy Traverse

asked by: Robert B

0

Expert Reply:

The T-One Vehicle Wiring Harness for Factory Tow Package # 118271 just has the 7-Way Trailer Connector plug at hitch end. If you are looking for a trailer connector with both a 4 and 7-way connection, # HM40975 is a confirmed to fit the 2017 Chevrolet Traverse with factory Tow Package.

expert reply by: Timothy G

0

Answer 1

I do have a way for you to have a 7-way and 4-Pole connector on your 2020 Chevrolet Traverse, but there isn't a wiring harness for your car that comes with both plugs. You can use the T-One Vehicle Wiring Harness #118287, which is confirmed…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

The main difference between a Class III hitch and a Class IV hitch is the capacities they set for the hitches. Class III hitches are rated for up to 6,000 lbs GTW with 600 lbs TW whereas a Class IV is rated for up to 12,000 lbs GTW and 1,000 TW. For…

view full answer...

Recommended Trailer Connector With 4 and 7-Way Connection For 2017 Chevrolet Traverse

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching