Replacement 7-Way and 4-Way Trailer Connection for 2014 Ford F-250 Factory Wiring  

Like you said the Pollak 7- and 4-Pole Trailer Connector Socket #HM40975 gets the 4-Way power from the same wiring as the 7-Way. All of the lighting functions for the 7- and 4-Way are already contained in the wiring that plugs into connector…

Basically they are the same connector with just a slightly different part number. We carry the part #HM40975 and if you ordered the 40974 from someone else (not recommended haha) you'd get the same thing which just a different part number on the…

I recommend the Pollak 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, part #HM40975 for your 2013 Ford F-250. I spoke with my contact at Hopkins and they said this the direct replacement for your F-250 if you have the oblong connector.…

We do offer a combination 7-Way/4-Pole trailer socket #HM40975 that can be used as a replacement for a damaged factory connector on your 2013 F-250. This requires connection to a harness that has a round U.S. Car type connector like what is shown in…

Yes, the replacement 7-Way part #HM40975 that you referenced will fit your 2016 Ford F-250. The round connector on the back of the connector will match the same connector you have at the rear of your truck. This will also give you a 4-way too.

As long as the round connector on the back of your 7-way is in tact all you need is the part #HM40975 to plug into it and you'd be set. If the round connector is damaged you can cut the harness off and use the #HM40975-11998 to hardwire a new…

The 7-way on your trailer could be wired correctly as-is. Not all 7-ways will have wires run to every one of the pins. Typically, if there are only 5 wires you will be missing the circuits will be the 12-volt accessory and the reverse light circuit.…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…