Replacement Seal for 1-1/4 Inch Inner Diameter Measurement
Question:
I have a boat trailer with 11/8 spindle shaft that the bearing rides on. Where the seal sets I am told is the wider inner most portion of the shaft. An that measures 11/4. I used a single seal from napa after replacing the bearings an it blew out after 3 miles. Do I need a double seal? This is the 2nd seal I have tried. I cleaned the shaft with emery cloth it is smooth as slink
asked by: Cody
0
Expert Reply:
The double lip will provide a better seal, so I'd give it a shot. You will want the Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1 # 34823 for the measurement you gave.
expert reply by:
Jason S
0
Product Page this Question was Asked From
Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.249 Inch I.D.
- 1.983 Inch O.D.
- TruRyde
more information >
Continue Researching
- Search Results: valve stems
- Q&A: Does Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel Have Higher PSI Valve Stem
- Shop: Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Video: Americana Tire Inflation and Repair - Valve Stems - AM20904 Review
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range D
- Shop: Americana High Pressure Rubber Snap-In Valve Stem - 1-1/4" Long - Up to 100 psi
- Shop: Americana High Pressure Rubber Snap-In Valve Stem - 1-1/2" Long - Up to 80 psi
- Shop: Loadstar K399 Bias Trailer Tire - 215/60-8 - Load Range D
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Video: Bearing Repacking and Grease Seals Installation
- Video: TruRyde Trailer Bearings and Races Kit Installation
- Video: TruRyde Trailer Bearings Races Seals Caps - Bearings - BK1-150 Review
- Video: TruRyde Trailer Bearings Races Seals Caps - Seals - RG06-020 Review
- Q&A: How to Measure to Find Replacement Grease Seal Based on Inner and Outer Diameters
- Q&A: Bearing Buddy Recommendation for Hub with Bearings L44649
- Q&A: If Trailer Hub Needs New Grease Seals Do Bearings Need to be Replaced
- Q&A: Replacement Bearing, Races, and Seals for a Trailer with L44649 Inner and Outer Bearings
- Q&A: How to Select Replacement Hubs for 1970s Dilly Trailer with 4-Lug Hubs
- Article: Trailer Wiring Diagrams
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Search Results: 44649
- Shop: Trailer Hitch
- Article: Trailer Tire Sizing
- Search Results: 25580
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Trailer Wiring
- Search Results: 68149
- Article: Most Popular Wheel Bearings
- Shop: Brake Controller