How to Measure to Find Replacement Grease Seal Based on Inner and Outer Diameters
Question:
I need a replacement for a grease seal. 16192TC and I can’t find it.
asked by: William
Expert Reply:
I was not able to find confirmed dimensions for the seal part 16192TC but we do have many grease seals and it is possible to find a replacement based on the dimensions.
The seal inner diameter corresponds to the diameter of the spindle; the outer diameter corresponds to the inner bore of the hub assembly where the seal is installed. If you have or can borrow a precision caliper, you can take these spindle and hub bore measurements. You'll need to measure to the nearest thousandth of an inch, such as 1.234-inches. Please refer to the linked photo for help on where to measure the spindle.
Then simply search our site using those dimensions. I linked a help article and a page for all grease seals we offer where you can click on the required inner and outer diameters. The seal that you referenced, part # 34823, has an I.D. of 1.249-inches and an O.D. of 1.983-inches.
Product Page this Question was Asked From
Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.249 Inch I.D.
- 1.983 Inch O.D.
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Shop: Center Hanger for 2" Wide Slipper Springs - 4-1/2" Tall - 7/8" Bolt Hole
- Article: Slipper Spring Trailer Suspension System Review
- Search Results: hub seal
- Search Results: apt6se
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Shop: Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 38" Axle Spacing
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Q&A: Replacement Grease Seal for Rockwell American 2K Spindle
- Video: Redline Trailer Suspension - Leaf Spring Suspension - 29-5-1 Review
- Shop: Tandem-Axle Trailer Hangers for 2" Slipper Springs
- Search Results: valve stems
- Q&A: Double Lip Seal Recommendation for Trailer Hub on BTR Spindle for Marine Application
- Q&A: Can Bearing Buddy Grease Seal Sets Be Used With BTR EZ Lube Spindles?
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Shop: Replacement Breakaway Cable for Dexter Model 60 Brake Actuators
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Does Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel Have Higher PSI Valve Stem
- Search Results: center hanger
- Q&A: How to Order Longer Equalizer Kit for Slipper Springs Than # APTT6SE
- Video: Americana Tire Inflation and Repair - Valve Stems - AM20904 Review
- Q&A: Replacement Grease Seal For 15192TC Grease Seal On Older Utility Trailer
- Video: Bearing Repacking and Grease Seals Installation
- Video: TruRyde Trailer Bearings Races Seals Caps - Bearings - BK1-150 Review
- Video: TruRyde Trailer Bearings and Races Kit Installation
- Video: TruRyde Trailer Bearings Races Seals Caps - Seals - RG06-020 Review
- Search Results: seals for trailer bearings
- Search Results: seal cross reference
- Video: TruRyde Trailer Bearings Races Seals Caps - Seals - 34823 Review
- Search Results: dexter axle grease seals