If Trailer Hub Needs New Grease Seals Do Bearings Need to be Replaced
Question:
Have grease on inside of both boat trailer wheels. I assume the seals Are bad. Can I replace the seals or does the entire bearings, races, and seals need to be replaced?
asked by: Benjamin W
Helpful Expert Reply:
Most likely all you have to do is replace the seal, but to be safe you'd want to pull the hub off and inspect the bearings to make sure everything looks good. It's one of those things where you're already right there so you may as well take a look.
To pick out a replacement grease seal you will need to measure the diameter of the spindle where the grease seal rides with a digital or dial caliper and then need to measure the hub bore where the current seal rides. With those two dimensions we can pick out the correct seal that you would need.
I attached a link to a page that has all of the grease seals we carry. You will need to select your inner and outer diameter from the filters on the page and the correct seals will be listed.
I also attached a video link down below that shows how to remove the hub components and inspect them all.
Product Page this Question was Asked From
Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649
- Race L44610
- 2200 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: TruRyde Trailer Bearings Races Seals Caps - Bearings - BK1-150 Review
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Mystik JT-6 High Performace Synthetic Grease - 1 Lb Can
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Q&A: Bearing Kit Recommendation for Hub that Has Bearing Numbers L44649 and Races L44610
- Q&A: Bearing Kit For Dexter EZ Lube Axle That Uses L44649 Bearings
- Q&A: Who Manufactures Bearing Kit BK1-150?
- Video: Review of LubriMatic Lubricants Sealants Adhesives - Grease - L74FR
- Shop: Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Video: TruRyde Trailer Bearings Races Seals Caps - Seals - RG06-020 Review
- Video: TruRyde Trailer Bearings and Races Kit Installation
- Video: Bearing Repacking and Grease Seals Installation
- Q&A: Replacement Bearing, Races, and Seals for a Trailer with L44649 Inner and Outer Bearings
- Shop: Grease Seals (pair)
- Shop: 10-10 Grease or Oil Double-Lip Seals - Qty 2
- Q&A: Replacement Seal for 1-1/4 Inch Inner Diameter Measurement
- Q&A: How to Measure to Find Replacement Grease Seal Based on Inner and Outer Diameters
- Q&A: Bearing Buddy Recommendation for Hub with Bearings L44649
- Article: Most Popular Wheel Bearings
- Search Results: bearing buddy
- Shop: Trailer Hitch
- Search Results: l44649
- Article: Trailer Tire Sizing
- Shop: Trailer Wiring
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: grease
- Shop: Brake Controller
- Search Results: 25580
- Article: Trailer Wiring Diagrams