What is Ground Clearance for Curt Hitch # C13315 on 2018 Mazda CX-5

Question

Question:

Thank you! Do you know if thats from the center of the opening?

asked by: Phillip C

0

Expert Reply:

When the Curt hitch # C13315 is installed it will have right at 12 inches of ground clearance on your 2018 Mazda CX-5.

expert reply by: Jameson C

0

Phillip C.

3/15/2018

Thank you! Do you know if thats from the center of the opening?

Reply

Jameson C.

3/15/2018

That would be from the bottom of the hitch to the ground.

Reply

Answer 1

I do have a solution for you, however there is definitely not enough ground clearance at the hitch connection between your Mazda CX-5 and 6x12 utility trailer. Any slight incline or bump in the road is going to cause issues with your current setup.…

view full answer...

Answer 2

The Curt 2" Trailer Hitch Receiver #C13315 is an excellent option for your 2019 Mazda CX-5 and really the only other option available that I would recommend above it is the etrailer.com 2" Trailer Hitch #e98902, and that is only due to the…

view full answer...

Answer 3

The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13315 is a fit for your 2020 Mazda CX-5 GT. The Grand Touring models have an additional underbody trim piece that will need to be permanently removed for hitch installation. This is…

view full answer...

Answer 4

For a 2 inch hitch ball that will work perfectly with the Curt Ball Mount #C45070 you mentioned I recommend the Tow Ready #63845. When installing the ball it should be torqued down to 250 foot pounds. I have attached a couple short video reviews on…

view full answer...

Answer 5

I apologize for confusion on towing capacity figures. The hitches we offer are first designed to fit the vehicle and then reinforced to be as strong as possible. Then the hitch is fail tested till a safe capacity is decided on. A lot of times the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 9

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...