Replacement Leg for TracRac TracONE Ladder Rack

Question

Question:

Need a replacement leg for the TracRac TracONE. Mine is 23 3/4inch In length.

asked by: Greg W

0

Expert Reply:

For your TracOne, the replacement leg is normally # 8523446001 but that has a length of 26-1/4 inches. We don't have anything specific to the dimensions you gave, but we do that the following:
# TA7521902002 at 22-3/4 inches tall
# TA7521902001 at 21 inches tall

You may also need the Replacement Modular Base for TracRac Fixed Mount Ladder Rack - Left Front/Right Rear - Qty 1 # TAPT-27001 or Right Front/Left Rear # 8528383001 for your TracRac TracOne system.

expert reply by: Jason S

0

Answer 1

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only…

view full answer...

Answer 2

I have a great solution for you. Unfortunately, Thule does not make a low-profile rack that will work with the Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks #TH21610. However, a great low-profile solution is to use the Thule Roof…

view full answer...

Answer 3

Based on your pictures and dimensions the part #TA7521902001 is the correct replacement leg. This is 21 inches long though so you might remeasure yours again as it's easy to be off by 1/4 inch.

view full answer...

Answer 4

The dimensions of the Replacement Modular Base for TracRac Fixed Mount Ladder Rack - Left Front/Right Rear - Qty 1, #TAPT-27001, are 16 long x 3-1/2 wide x 2 Inches tall. I've attached a picture to help. This replacement base works with TracRac…

view full answer...

Answer 5

Thank you for reaching back out and clarifying that, the reason you received a response talking about a 5th wheel hitch is because base rails are a 5th wheel product. What you are needing is something different than base rails. The TracRac's are…

view full answer...

Answer 6

Probably the best way to describe this is to provide the dimensions of the T-portion of the bolt that fits in the slot on the TracRac crossbar. I pulled a #HD-80122 from inventory and measured it as shown in the provided photo. The threaded portion…

view full answer...

Answer 7

The only difference between the Thule TracRac TracONE Ladder Rack #TH27000XT-500 which fits your 2014 Toyota Tacoma and the Rack #TH27000XT-501 which fits your 2022 Toyota Tacoma is the mounting kit. For your 2022 it uses the Mount Kit #TH41501 while…

view full answer...

Answer 8

The Replacement Bottom Infill part #8880635 was designed to fit a channel 3/8 inches in width and would easily fit a thickness of 1/8 of an inch so this would work for you although it was designed for Yakima bars.

view full answer...

Answer 9

I do have an option for you but the Thule TracRac SR won't work well with the Retrax Tonneau Covers even if the stake pockets are open. The rails are likely going to hit on the cover and it would likely not be able to sit flush on the bed. That…

view full answer...

Answer 10

For a replacement for the TracRac SR racks use #TAFX-30007-02 which is 69-1/2 inches long. It also fits TracOne, T-Rac Pro2, and UtilityRac SR ladder racks.

view full answer...

Answer 11

I recommend using the Thule UpRide Roof Bike Rack #TH599000-FB with your TracRac Crossbars #8542526002. The RockyMounts TomaHawk Roof Bike Rack #RKY1222 will only clamp to a crossbar that is up to 3-1/2" wide. The Upride #TH599000-FB includes…

view full answer...

Answer 12

The Thule Hullavator #TH898 is designed to fit the same channel dimensions that your TracRac ladder rack has so there really isn't any reason the Hullavator couldn't fit the TracRac bars. TracRac is also made by Thule as well.

view full answer...