Will Trailer Idler Hub Assembly for 3,500-lb Axles AKIHUB-545-35-PG-K Fit Lippert Axles
Question:
I have a 6000 lb GTW trailer with Lippert axles. I cant find any indication that they are 3500 lb each but I am assuming they are based on gross weight rating of the trailer and the bolt pattern being 5x4-1/2. Do you believe this is the correct part for a replacement?
asked by: Dean S
Helpful Expert Reply:
If the trailer does indeed have 3500 pound axles then hub # AKIHUB-545-35-K will likely fit. To be sure you can pull a hub and check the bearing numbers stamped into the sides of the bearings on the trailer currently. If the inner bearing is L68149, the outer is L44649, and the seal at the back has a 1.719 inner diameter then the hub will fit for sure.
On Lippert axles its label will always be on the back of the axle on the center of the beam. You can check there and also check for a sticker or plate at the front of the trailer somewhere that may indicate axle capacity.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Kenda K353 Bias Trailer Tire - 4.80-12 - Load Range C
- Shop: Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 84545BX Review
- Video: Review of TruRyde Trailer Spindles - Standard Spindle - TRU47FR
- Video: etrailer Trailer Idler Hub Assembly Installation
- Video: Review of TruRyde Trailer Spindles - Standard Spindle - TRU97FR
- Video: Review of TruRyde Trailer Spindles - EZ Lube Spindle - TRU74FR
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-K Review
- Shop: #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Shop: Square BT8 Spindle for 2,000-lb Trailer Axles - 1-1/2" Wide
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Q&A: Replacement Trailer Hub Recommendation for Hub with Bearings L68149 and L44649
- Q&A: Will etrailer.com Hub AKIHUB-545-35-K fit Trailer Hub with Bearing Spindle Diameter 1.06 and 1.375
- Q&A: Highest Weight Rated Trailer Hubs that have Bolt Pattern of 5 on 4-1/2 inches
- Q&A: Is the Grease Seal Seat Larger Than the Bar Stock on the Square #84 Spindle TRU47FR
- Q&A: Bearing Kit Recommendation for Dexter 8-248 Hub
- Q&A: Correct 5-Lug Hub for Square #84 Spindle TRU47FR
- Q&A: Correct Hubs for Boat Trailer with L68149 and L44649 Bearings
- Video: Review of Kenda Trailer Tires and Wheels - Tire Only - AM10062
- Search Results: 44649
- Shop: Trailer Hitch
- Article: Trailer Tire Sizing
- Search Results: dust cap
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 68149
- Shop: Brake Controller