Difference Between EZ Lube Compatible Hubs and Regular Hubs
Question:
Hi - What exactly is meant by Easy-Lube hubs, please? Do the wheel bearings have grease fittings? No grease? Thank you.
asked by: John
Expert Reply:
Some trailers are equipped with EZ Lube spindles, which have a grease fitting or zerk in the end of the spindle, and a small hole in the spindle that lets grease enter the interior of the hub and reach the bearings. This allows grease to be added to the trailer hubs, but the bearings would still need to be inspected and repacked before installation.
The only difference between an EZ Lube hub and a non-EZ Lube Hub would be the grease cap. For an EZ Lube hub, the grease cap would have a removable plug to make the grease fitting easy to access without needing to remove the grease cap.
Having EZ Lube spindles can be handy, but you'll want to avoid overfilling the hub with grease, as it can cause the grease seals in the back of the hub to blow out and allow grease to escape out the back of the hub, and get all over everything. This can also allow water to infiltrate the hub, which can make the remaining grease less effective over time. Using double-lip grease seals make blowing out the seal less likely, but it's still possible if the hub is aggressively overfilled.
If you have standard spindles without the grease fitting, you might be able to use a Bearing Buddy, such as part # BB1980A-SS. In order to provide the correct Bearing Buddy, I'd need to know the outer wheel bearing number of your hub and the hub bore inside diameter.
Products Referenced in This Question
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Article: How to Measure a Trailer Axle
- Shop: Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 7,000 lbs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 5 Bolt Flange - 7,000 lbs
- Shop: CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Shop: Trailer Hitch
- Shop: #42 Spindle for 5,200-lb to 7,000-lb Trailer Axles - 2-1/4" Diameter
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: front receiver hitch
- Shop: Trailer Wiring
- Shop: Brake Controller
- Search Results: trailer hub
- Search Results: trailer lights
- Video: Trailer Axle Replacement
- Shop: Front Mount Hitch
- Q&A: Can You Install an EZ Lube Hub and Drum on a Non EZ Lube Axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Shop: Vehicle Sway Bars
- Search Results: am31952
- Search Results: 44649
- Video: TowSmart 4-Way Folding Lug Wrench Review
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Video: TruRyde Electric Trailer Brake Kit Installation
- Search Results: brake controller
- Search Results: 7 way to 4 way adapter
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: Titan Hydraulic Trailer Brake Installation