Correct 5-Lug Hub for Square #84 Spindle TRU47FR
Question:
Will this hub fit onTruRyde spindle TRU47FR
asked by: Roy P
1
Helpful Expert Reply:
The Trailer Idler Hub Assembly for 3,500-lb Axles part # AKIHUB-545-35-K is what you'll want to use with the Square #84 Spindle part # TRU47FR.
expert reply by:
Conner L
1
Products Referenced in This Question
Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Trailer Spindles
- Standard Spindle
- 1-1/2 Inch Diameter
- Square
- For 3500 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Shop: Kenda K353 Bias Trailer Tire - 4.80-12 - Load Range C
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Highest Weight Rated Trailer Hubs that have Bolt Pattern of 5 on 4-1/2 inches
- Q&A: Correct Hubs for Boat Trailer with L68149 and L44649 Bearings
- Video: Review of TruRyde Trailer Spindles - Standard Spindle - TRU47FR
- Q&A: Hub Recommendation for Spindle with Diameters of .75 and 1.25 inches
- Video: etrailer Trailer Idler Hub Assembly Installation
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 84545BX Review
- Video: Review of TruRyde Trailer Spindles - EZ Lube Spindle - TRU74FR
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-K Review
- Video: Review of TruRyde Trailer Spindles - Standard Spindle - TRU97FR
- Shop: #84 Spindle for 3,500-lb Trailer Axles - 2" Diameter
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Q&A: Distance From End of TruRyde #84 Spindle Stub to the Back of an Installed Hub
- Q&A: Determining Which Hub Replaces Dexter 8-243 Clamp On Wheel Hub
- Q&A: Bearing Kit Recommendation for Dexter 8-248 Hub
- Video: Review of Kenda Trailer Tires and Wheels - Tire Only - AM10062
- Search Results: akihub~545~35~k
- Q&A: Upgraded Hubs with Higher Weight Capacity for #84 Spindle
- Search Results: trailer axle spindle
- Article: What Is A Leaf Spring? (Everything You Need to Know About Trailer Leaf Suspension)