Replacement Velcro Strip for Truck Bed Rails and Tonneau Cover

Question

Question:

Hi there I need to replace the Velcro on my bed rails, it’s 1 inch wide, can’t seem to find that on your site, if you could help me out I would be greatly appreciated, thank you

asked by: Shawn

0

Expert Reply:

It sounds like you are needing to replace the velco strip that is used for your older style tonneau cover. I recommend taking a look at the Access Replacement Velcro Strip # A60270, which measures exactly 1 inch wide.

This is designed for Access tonneau covers but may work if you have a different model. The full strip measures 17 feet long but it can be trimmed to fit shorter beds if needed. This does not have an adhesive back as it will fit into a channel on the side rails on Access and Vanish tonneau covers.

expert reply by: Chris R

0

Answer 1

Yes, the replacement Velcro strip #A60270 (17x1 inches) will replace the Velcro strip on your tonneau cover with a Velcro strip measuring 1-1/4 inches wide. The replacement Velcro strips are made in 1 inch #A60270 and 1-1/2 inch #A30474 but not 1-1/4…

view full answer...

Answer 2

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 3

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 4

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 5

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 6

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 7

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 8

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 9

Hey Angela, If you're wanting a ladder rack then I recommend the Thule TracRac TracONE Ladder Rack #TH27000XTB-TA. This rack comes with load stops that you could use to secure your paddleboards or you could go with a track mounted carrier like…

view full answer...

Answer 10

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 11

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 12

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Replacement Velcro Strip for Truck Bed Rails and Tonneau Cover

Product Page this Question was Asked From

Continue Researching