Is 2,500 lb Capacity on Stromberg Carlson Electric A-Frame Tongue Jack the Tongue Weight Capacity?

Question

Question:

This tongue jack is rated for 2500 lbs, is that the total trailer weight, or are we talking tongue weight? Stromberg Carlson Electric A-Frame Tongue Jack - 18 Lift - 2,500 lbs

asked by: Roberto S

0

Expert Reply:

The 2,500 lb capacity of the Stromberg Carlson Electric A-Frame Tongue Jack # JET-2500 is referring to the tongue weight, and is the lift capacity of the jack.

I've added links to a pair of video reviews on this jack for you to take a look at as well.

expert reply by: Kyle S

0

click to enlarge

Answer 1

The Brophy Cable Camper Jacks - 67" Max Lift Height - 3,000 lbs - Qty 2 #CJ74 don't really stick out . They hold the camper pretty much flush with the edge of the camper. I went into our warehouse to measure for you and the 2x2 inch l…

view full answer...

Answer 2

Trailer tires should always be inflated to the maximum psi indicated on the tire sidewall. This is because trailer tires are built with a thicker sidewall than passenger vehicle tires to handle more vertical load. If under inflated the thicker…

view full answer...

Answer 3

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…

view full answer...

Answer 4

I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The rule of thumb for estimating a tongue weight is 10-15 percent of trailer weight. A 4,600 pound trailer would have a tongue weight between 460 and 690 pounds. Somewhere between a 1,000 to 2,000 pound capacity jack would be fine. Having a jack that…

view full answer...

Answer 7

Hi Tom, I have two options to replace the electric tongue jack on your Jayco Whitehawk: Option 1: Electric Jack w/ Footplate #EJ-3520-BBX. This jack is going to be your no-frills 'get the job done' style jack. It has a 3,500lb capacity and…

view full answer...

Answer 8

I went ahead and pulled this Replacement I-Beam Jack Bracket #LC349975 from our warehouse to measure. I have attached the dimensions below. Hope this Helps.

view full answer...

Answer 9

The Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR are able to lock into place at 30 and 60 degrees as stabilizers. They also have the 90 degree position where it is rated for 1,929 lbs and then the stored position.

view full answer...

Answer 10

We don't currently have any customer submitted photos for the Brophy Heavy Duty Cable Camper Jacks #CX74, but we do for the lower capacity #CJ74, which uses the same lift brackets. From the edge of the tube to the lift bracket is approximately…

view full answer...

Answer 11

We do have the panels separately. What you're looking for is the Go Power Overlander Expansion Kit - 200 Watt Solar Panel #34282182.

view full answer...

Answer 12

Hi Bruce, To lift your trailer we'll first need to check of the suspension and see if you have torsion axles or a leaf spring suspension. If you have torsion axles then I'll need to see the axle tag in order to determine what you have so I…

view full answer...

Is 2,500 lb Capacity on Stromberg Carlson Electric A-Frame Tongue Jack the Tongue Weight Capacity?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching